The textile and apparel production and consumption generate a huge amount of solid textile waste. Mechanical recycling is one main method to recycle cotton waste; however, shredding in mechanical recycling shortens fiber length and reduces fiber quality. As a result, the application of mechanically recycled textiles may be limited. This research investigated mechanical methods to recycle post-consumer cotton textile waste and designed and developed second-life products. This study applied research through design methodology and documented step-by-step textile and product development practices to communicate the results. Using the textiles from deconstructed end-of-use garments with a high cotton content (80% or higher), combined with other materials, the researchers developed yarns, and nonwoven, woven, quilted, tufted fabrics. The researchers tested textile properties such as “yarn” tensile strength and elongation, fabric thickness, thermal resistance, air permeability, and stiffness. Using fabrics developed from end-of-use cotton waste, the researchers designed and developed high-value products such as bags, decorative textile, a hat, cell phone and glasses cases, and garments to contribute to the sustainability and circularity of cotton.
The negative environmental impacts of the current linear system of textile and apparel production are well-documented and require urgent action. The sector lacks an effective recycling system, resulting in massive waste and environmental pollution. This paper presents the results of qualitative research involving textile and apparel industry stakeholders, including representatives from brands and retailers, waste collectors, recyclers, non-profit organizations, academic institutions, and government agencies. Our research focused on stakeholder perceptions of the significance and importance of textile circularity, the challenges that exist for transitioning the textile and apparel industry from a linear system to a circular economy (CE), and resources that exist to support this transition. The results of this study call attention to the following urgent requirements: a consistent definition of CE to promote transparency and accountability and prevent greenwashing; improved systems for materials identification, sorting, and pre-processing of post-consumer textile waste to enable recycling; innovations in mechanical recycling technologies to maintain the value of recycled materials; and new, materials-driven approaches to design and manufacturing that are responsive to feedstock variability and diverse consumer needs. The research findings also suggest the need for flexible, regional CEs that are rooted in community partnerships.
Mechanical textile recycling presents a sustainable alternative to linear “take–make–waste” models in the fashion industry. This study intended to develop yarns using textile-to-fiber mechanically recycled fibers. ReSpool mechanically recycled wool, cotton, polyester, silk, and rayon fibers from pre-consumer and post-consumer textiles were acquired and blended with new fibers at varying ratios (100% ReSpool fibers, 85% ReSpool fibers, and 65% ReSpool fibers) to make batts, which were spun into yarns. The yarns’ size (Tex), strength (breaking force and tenacity), elongation, and moisture regain were evaluated. ReSpool recycled fibers from both pre-consumer and post-consumer textiles can be used to produce yarns that have appropriate strength for weaving and knitting. It was possible to produce yarns from 100% ReSpool recycled wool, polyester, and silk fibers, but ReSpool recycled cotton and rayon fibers must be blended with new fibers to produce yarns. There was no significant difference among the percentage of ReSpool recycled polyester and cotton fibers in the yarns on the strength and elongation of the yarn. It is recommended to use the higher percentage of ReSpool recycled fibers in yarn development to maximize recycled material utilization.