With the continuous progress in active debris-removal technology, scientists are increasingly concerned about the concept of space-net capturing system. The space-net capturing system is a long-range-launch flexible capture system, which has great potential to capture non-cooperative targets such as inactive satellites and upper stages. In this work, the launch scheme is studied by experiment and simulation, including two-step ejection and multi-point-traction analyses. The numerical model of the tether/net is based on finite element method and is verified by full-scale ground experiment. The results of the ground experiment and numerical simulation show that the two-step ejection and six-point traction scheme of the space-net system is superior to the traditional one-step ejection and four-point traction launch scheme.
27 February 2014 in Structural and Multidisciplinary Optimization
The coupling behaviors of a special parachute’s inflation incorporating fluid–structure interaction and flight dynamics are investigated based on the multibody dynamic model and LS-DYNA nonlinear analysis code. A new coupling model is developed to predict both the opening phase of parachute and the trajectory of payload during airdrop mission in low attitude. The moving mesh technology is introduced to realize the finite mass inflation simulation. A simplified integration platform is built by coupling the fluid–structure interaction and flight dynamics model, and solved based on two-way data transfer to efficiently replicate the dynamic characteristics of parachute finite mass inflation. Finally, the opening performances of the parachute at different airdropping velocities are analyzed and compared with the experimental results. The unsteady flow dynamics is simulated and the wake re-contacts phenomenon occurred. Taking consideration of the periodical disturb of wind gust, the trajectory of parachute–payload system is simulated and compared with the real airdrop test results. In conclusion, the results show that this coupling model is efficient to simulate and predict the dynamics behaviors of parachute–payload system in a finite mass inflation scenario, which will be beneficial for airdrop missions.
20 November 2014 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
A sequential solution approach based on an adaptive wavelet collocation method is proposed for solving optimal control problems. By expanding the state and control variables with wavelet multi-resolution decomposition, an original optimal control problem can be transcribed into a nonlinear programming problem that can be solved by general methods. In the proposed framework, an iterative algorithm starts from an initial coarse grid with few collocations. Subsequent solutions can thus be obtained on a dynamically refined grid by an adaptive wavelet collocation method, while the previous coarser level solution can be taken as the initial guess for the next iteration. Consequently, the computational grid for direct numerical optimization method is able to automatically adapt to any irregularities or discontinuities in the solution. The efficiency and accuracy of the proposed algorithm are verified by two typical examples.
A mesh adaptation method is proposed for solving optimal control problems with nonsmooth control. The original optimal control problem (OCP) is transcribed into a nonlinear programming (NLP) problem by using the Runge-Kutta discretization method, in which the NLP can be solved by using standard nonlinear programming codes. The method employs collocations from the dyadic background points, which used for the second-generation wavelet (SGW) translation simultaneously. The SGW is used to approximate the control variables and get the wavelet coefficients once they are obtained. In regions contain discontinuities, the magnitude of the relevant wavelet coefficients is large than other regions. The corresponding dyadic background points are reserved as the collocation points. Furthermore, the approximation error of the control and/or state variables can be predicted by a given threshold. Thus, the accuracy and efficiency can be balanced in a simple way. Finally, the method is demonstrated by three numerical examples from the open literature.