Melania Leanza

Mrs. Melania Leanza

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 September 2025 in Polymers
Verified
Journal Article
Open access
PDF file
MLMelania Leanza
Melania Leanza
DCDomenico Carmelo Carbone
Domenico Carmelo Carbone
GPGiovanna Poggi
Giovanna Poggi
MRMarco Rapisarda
Marco Rapisarda
MBMarilena Baiamonte
Marilena Baiamonte
Paola RizzarelliPaola Rizzarelli
Paola Rizzarelli
The influence of minor components on leaching molecular iodine (I2) through polypropylene (PP)-based packaging from a povidone iodine-based (PVP-I) formulation, simulating an ophthalmic application, was evaluated. I2 is a cheap, broad-spectrum, and multi-target antiseptic. Nevertheless, it is volatile, and the prolonged storage of I2-based formulations is demanding in plastic packaging because of transmission through the material. Therefore, we explored the possibility of moderating the loss of I2 from an iodophor formulation by introducing small amounts of molecular iodine into the polymer material commonly used in eyedropper caps, i.e., PP. Thus, PP was blended via an extrusion process with a polymeric complex containing iodine (such as PVP-I) or with a second polymeric component able to complex the I2 released from an iodophor solution. The aim of this work was to introduce I2 into PP-based polymer matrices without using organic solvents and indirectly, i.e., through the addition of components that could generate molecular iodine or complex it in the solid phase, as I2 is heat-sensitive. To increase the miscibility between PP and PVP-I, poly(N-vinylpyrrolidone) (PVP) or a vinyl pyrrolidone vinyl acetate copolymer 55/45 (Sokalan) were added as compatibilizers. The PP-based binary and ternary blends, in granular or sheet form, were characterized thermally (Differential Scanning Calorimetry, DSC, and Thermogravimetric analysis, TGA), mechanically (tensile tests), morphologically (scanning electron microscopy (SEM)), and chemically (attenuated total reflectance Fourier transform infrared (ATR-FTIR)). Additionally, the variation in wettability induced by the introduction of the hydrophilic minority components was determined by static contact angle measurements (static contact angle (SCA)), and tests were carried out to determine the barrier properties against oxygen (oxygen transmission rate (OTR)) and molecular iodine. The I2 leaching of the different blends was compared with that of PP by monitoring the I2 retention in a buffered PVP-I solution via UV-vis spectroscopy. Overall, the experimental data showed the capability of the minority components in the blends to increase thermal stability as well as act as a barrier to oxygen. Additionally, the PP blend with PVP-I induced a reduction in molecular iodine leaching in comparison with PP.

30 September 2026 in Polymer Composites
Verified
Journal Article
Open access
EIErika Indovino
Erika Indovino
MLMelania Leanza
Melania Leanza
Maria Chiara MistrettaMaria Chiara Mistretta
Maria Chiara Mistretta
MRMarco Rapisarda
Marco Rapisarda
ACAlessandra Culmone
Alessandra Culmone
Paola RizzarelliPaola Rizzarelli
Paola Rizzarelli
Artemisia arborescens is a Mediterranean shrub widely used for essential oil production, generating significant amounts of spent biomass after extraction. This spent biomass, often underutilized, represents a valuable resource for sustainable biocomposites. This study focuses on the development of biocomposites using a biobased poly(butylene succinate‐ co ‐butylene adipate) (PBSA) as the matrix and spent Artemisia arborescens (AA) as a filler. Two filler loadings (10% and 20%) were incorporated via melt compounding using an internal batch mixer, followed by compression molding into sheets, and the resulting biocomposites were thoroughly characterized. The influence of AA incorporation on the rheological, mechanical, and thermal properties, as well as the degradation in compost and biodegradation behavior in a simulated aqueous environment, were investigated in comparison with neat PBSA. The incorporation of the filler led to a significant stiffening effect, with Young's modulus increasing from 198 to 312 MPa (+58%), accompanied by a drastic loss of ductility, as the elongation at break dropped from 331% to 12.6%. Furthermore, the filler accelerated both the biodegradation process at 25°C and disintegrability rate in compost at 58°C. Under composting conditions, biocomposites exhibited an 82%–87% mass loss after 30 days, compared to about 40% for neat PBSA, and showed nearly double biodegradation according to ISO 14851.

3 November 2026 in Polymer Composites
Verified
Journal Article
Closed access
PDF file
MLMelania Leanza
Melania Leanza
Luigi BottaLuigi Botta
Luigi Botta
EIErika Indovino
Erika Indovino
VTVincenzo Titone
Vincenzo Titone
DMDonatella Melilli
Donatella Melilli
Maria Chiara MistrettaMaria Chiara Mistretta
Maria Chiara Mistretta