Purpose – The purpose of this paper is to focus on the application of the Trefftz method to the calculation of the two-dimensional (2D) temperature field in the boiling refrigerant flow through an asymmetrically heated vertical minichannel with a rectangular cross-section. The considerations were limited to determining the temperature of the continuous phase – liquid for bubbly and bubbly-slug flow. The numerical solution found with the Trefftz methods was compared with the simplified solution. For nucleate boiling, heat transfer coefficient at the heating foil – liquid contact was determined. Design/methodology/approach – The Trefftz method was used to determine 2D temperature distributions for the glass pane, the heating foil and the boiling liquid. The temperature fields were approximated by the sum of the particular solution and the linear combination of suitable Trefftz functions. Coefficients of linear combination were computed using experimental data, including heating foil temperature measurements obtained with the liquid-crystal method and experimentally determined void fraction. The computations were based on the Trefftz method supplemented with the adjustment calculus. Findings – The way of solving direct and inverse problems of heat conduction in solid bodies (isolating glass, heating foil) and in liquids (boiling refrigerant flowing through the minichannel) was presented. For the first time, both 2D temperature fields for the heating foil and the boiling liquid were calculated while simultaneously using the Trefftz method. The known temperature values of the foil and liquid allowed the calculation of the heat transfer coefficient and the heat flux at the heating foil-liquid contact. Adjustment calculus implemented into the Trefftz method was used to smooth the measurement data and to reduce their errors. Practical implications – The approach proposed in the paper can be applied to determining 2D temperature field, heat flux and heat transfer coefficient in direct and inverse problems concerning two-phase flowing miniature compact heat exchangers. Originality/value – The paper presents a novel implementation of the Trefftz method to simultaneous solving an inverse problem in the heating foil and the contacting flowing liquid.

The paper focuses on the numerical solution to two-dimensional temperature field of boiling liquid flowing along a vertical, asymmetrically heated minichannel with a rectangular cross-section. One of the walls of a minichannel is DC supplied single-sided enhanced foil with mini-recesses distributed unevenly in the selected area. The parallel walls are made of glass panes for thermal insulation and they are intended for observation of the two-phase flow and the void fraction. The thin layer of thermosensitive liquid crystal paint on the outer side of the foil enabled to record two-dimensional temperature distribution of outer foil surface. The paper described computations based on Trefftz method for finding two-dimensional temperature field of boiling liquid flowing along the minichannel. The presented research is limited only to the liquid phase of the two-phase mixture observed in the minichannel. The velocity of liquid flowing through the minichannel is represented by a piecewise linear approximating function. To solve energy equation for liquid phase, Trefftz functions specially generated for this purpose were employed. Temperature field in the fluid was approximated by a linear combination of Trefftz functions. Equalizing calculus was applied to the Trefftz method to smooth temperature measurements and reduce measurement errors. Temperature at the interface between working fluid and foil amounts to the saturation temperature. Temperature distribution in the foil and the glass pane was also computed using proper Trefftz functions.

The intensification of heat transfer using two-phase boiling flow in mini-channels is widely used to dissipate the high heat fluxes in miniaturized electronic devices. However, the process itself is not fully recognized and still requires experimental studies and developing computation methods appropriate for them. The main aim of this work was the mathematical modeling of time-dependent heat transfer process in FC-72 flow boiling in a mini-channel heat sink with five parallel mini-channels of 1 mm depth. Channels have an asymmetrically heated wall while its outer temperature was measured by infrared thermography. The opposite wall of the mini-channels was transparent, helping to record flow patterns due to a high-speed digital camera. The objective of the numerical calculations was to determine the heat transfer coefficient on the wall-fluid contact surface from the Robin boundary condition. The problem was solved using methods based on the Trefftz-type functions. Three mathematical methods were applied in calculations: the FEM with Trefftz type basis functions, the Classical Trefftz Method, and the Hybrid Picard-Trefftz Method. The results were compared with the values of the heat transfer coefficient obtained from theoretical correlations from the literature.