Climate change is a growing threat to cultural heritage buildings and objects. Objects housed in historic buildings are at risk because the indoor environments in these buildings are difficult to control and often influenced by the outdoor climate. Hygroscopic materials, such as wood, will gain and release moisture during changes in relative humidity and temperature. These changes cause swelling and shrinkage, which may result in permanent damage. To increase the knowledge of climate-induced damage to heritage objects, it is essential to monitor moisture transport in wood. Simulation models need to be developed and improved to predict the influence of climate change. In a previous work, relative humidity and temperature was monitored at different depths inside wooden samples subjected to fluctuating climate over time. In this article, two methods, the hygrothermal building simulation software WUFI^® Pro and the Simplified model, were compared in relation to the measured data. The conclusion was that both methods can simulate moisture diffusion and transport in wooden object with a sufficient accuracy. Using the two methods for predicted climate change data show that the mean RH inside wood is rather constant, but the RH minimum and maximum vary with the predicted scenario and the type of building used for the simulation.

This paper focuses on the diagnosis of damage processes of decorative Roman renders of a group of tombs in the Porta Nocera necropolis in the ancient city of Pompeii, Italy. Unprotected from various climatic events, the tombs keep on deteriorating since they were first excavated in 1954. Extensive on-site and laboratory diagnostics using non-destructive and low-destructive techniques have been able to demonstrate that soluble salts are among the major agents of deterioration, causing damage in the form of render delamination. Gypsum is formed on the surface of the materials by the deposition of sulfur dioxide, resulting in reduced porosity and hardening of the surface. Soluble salts of nitrates and chlorides that penetrate the tombs’ masonry from the ground and are transported through the render layers tend to crystallize in subsurface. The crystallization—dilution cycles of the soluble salts cause major mechanical pressures, leading to the progressive destruction of the renders. Past conservation strategies to secure plasters have shown only limited effectiveness. In light of the data collected regarding salt decay, the authors propose new strategies, questioning the systematic use of grouts and restoration mortars for conservation treatments and focusing on preventive conservation and maintenance to ensure the long-term preservation of masonry and decorative surfaces of the tombs.

Silica aerogels are high-performance thermal insulation materials that can be used to provide unique solutions in the envelopes of buildings when space is limited. They are most often applied in historic buildings due to thin insulation thicknesses and since they are compatible with historic structures. In 2021, the first Aerogel Architecture Award was held at Empa in Switzerland in order to collect, evaluate and award outstanding uses of this relatively new building material. From the submitted projects, three were selected for an award by an expert jury. They showcased applications in which heritage protection and the conservation of a building’s character and expression were reconciled with significant improvements in the energy efficiency of the building. The submissions also showed that a broader communication of these types of solutions is important in order to provide more information and security to planners and heritage offices and to facilitate the application of these materials in the future so that they can contribute to the protection of cultural heritage and reductions in the operational and embodied emissions of our building stock by extending the life expectancy and energy efficiency of existing buildings.

Aspects of preventive conservation are central to the long-term preservation of archaeological sites such as Pompeii. Mitigating moisture ingress and its manifold effects on decay mechanisms such as salt degradation are of critical importance when planning durable conservation strategies. A suite of non-destructive techniques was used to diagnose decay mechanisms at an ancient tomb monument at the Porta Nocera Necropolis. Rising damp and salt contamination are shown to be actively contributing to on-going deterioration of the plaster surfaces. An existing shelter is shown to be inadequate in its protection. These initial results are used to inform a more in-depth, long-term survey as well as the design of a holistic preventive strategy.