Climate change is a growing threat to cultural heritage buildings and objects. Objects housed in historic buildings are at risk because the indoor environments in these buildings are difficult to control and often influenced by the outdoor climate. Hygroscopic materials, such as wood, will gain and release moisture during changes in relative humidity and temperature. These changes cause swelling and shrinkage, which may result in permanent damage. To increase the knowledge of climate-induced damage to heritage objects, it is essential to monitor moisture transport in wood. Simulation models need to be developed and improved to predict the influence of climate change. In a previous work, relative humidity and temperature was monitored at different depths inside wooden samples subjected to fluctuating climate over time. In this article, two methods, the hygrothermal building simulation software WUFI^® Pro and the Simplified model, were compared in relation to the measured data. The conclusion was that both methods can simulate moisture diffusion and transport in wooden object with a sufficient accuracy. Using the two methods for predicted climate change data show that the mean RH inside wood is rather constant, but the RH minimum and maximum vary with the predicted scenario and the type of building used for the simulation.

A substantial part of the collections of museums, libraries and archives is generally in storage. A central mission of such cultural institutions is collecting and preserving our cultural heritage....

The focus of this paper is on the large-format wooden panel painting Maundy Thursday Altarpiece from Southern Germany. Its wooden support and paint layer were severely damaged due to high climatic fluctuations, above all dryness. The aim of the research project was to develop a low-risk, conservatively acceptable procedure for controlled in situ humidification. In an interdisciplinary approach, a practical monitoring concept on-site was linked to art technology analyses, surface monitoring, hygrothermal simulations, and climate chamber tests. Based on the results, an individual climate corridor for controlled humidification of the case study was developed with the help of an enclosure and implemented in two gradual moistening phases. The combination of conservative support, measurement technology, and digital assessment allowed a controlled approach to a conservation optimum without other active interventions in the original material. The results highlight the need for object-specific strategies and humidity corridors at the interface between conservation, climate adaptation, and sustainability. A deviation from museum standard recommendations (depending on the guidelines 40–60% rH) shows the special challenges of monument preservation.