A star tracker lens works in the environment with the temperatures ranging from −40 °C to 80 °C (a range of 120 °C), which makes athermalization a crucial step in the design. Traditional approaches could spend quite an amount of iterative process in between the optimization for nominal condition and athermalization. It is highly desired that the optimization can start with a thermally robust layout to improve the design efficiency. This study takes the star tracker lens module with seven elements as the base for investigating the possible layout variation on dioptric power distribution and thermo-optic coefficient of the material, which are the two major factors of the layout interacting with each other to influence the thermal stability of the overall lens module. All the possible layouts are optimized firstly for the nominal condition at T = 20 °C, and only those meeting the optical performance specifications are selected for thermal performance evaluation. A merit function based on a thin lens model which represents the focal plane drift over a temperature range of 120 °C is then used as the criteria for ranking the layout variations passing the first stage. The layouts at top ranking exhibiting low focal plane drift become potential candidates as the final solution. The proposed methodology provides an efficient approach for designing thermally resilient star tracker optics, especially addressing the harsh thermal conditions encountered in Low Earth Orbit missions.
Wide-swath longwave infrared (LWIR) imaging from Low Earth Orbit (LEO) demands fast optics and rectilinear (F-tan) mapping for thermal mapping and multi-frame registration. Achieving an F/1.2 aperture with a 112° diagonal field of view (FOV) and distortion within ±5% is challenging, as mapping constraints and field-dominant off-axis aberrations become strongly coupled at large chief-ray angles. The low-distortion target is not only a geometric specification, but also a practical requirement that reduces peripheral compression, helps maintain edge-detail consistency, and lowers digital de-warping effort in the processing pipeline. While traditional LWIR secondary imaging is predominantly restricted to narrow-field cooled systems for cold-stop constraints, the proposed architecture utilizes a curved intermediate image to effectively decouple mapping formation in the field-dominant front objective from aperture-dominant correction in the rear group. Using chalcogenide glasses, the lens achieves a 5.7 mm effective focal length within a 186.9 mm total track. Analysis over the 8–12 μm band confirms performance approaching the diffraction limit at the 50 lp/mm Nyquist frequency alongside stable geometric fidelity across the full field. Thermal analysis from −40 °C to 80 °C and Monte Carlo tolerance analysis demonstrate stable imaging performance and manufacturing feasibility, confirming the effectiveness of the proposed design approach.