Plastic microbeads, widely incorporated into personal care and cleansing products, have emerged as a pervasive contaminant in freshwater systems, including in North America. Historical estimates indicate that North American consumers alone contributed trillions of microbeads daily to municipal wastewater, with global usage reaching quadrillions per day. Regulatory actions in 2017 in Canada and the USA to ban microbeads in personal care products appear to have greatly reduced microbead contamination levels, including a decrease in microbead proportion from 2 to 5% to 0.003%, and an 86% reduction in PE microbead discharge from wastewater treatment plants. Yet these particles still persist in the environment due to their resistance to degradation and continued release from unregulated sources, including industrial abrasives and certain cleaning agents. Studies across the Great Lakes, one of the world’s largest freshwater systems, have documented widespread microbead contamination in surface waters, sediments, and shorelines, highlighting their persistence and accumulation. This review synthesizes findings from key studies conducted between 2013 and 2017 to establish a pre-ban baseline of microbead distribution in the Great Lakes, and presents new data collected from 2018 to 2021 as a post-ban contamination assessment. The review emphasizes the unique challenges posed by microbeads within the broader context of microplastic pollution. We also hope that this paper underscores the critical role of polymer chemists and engineers in developing innovative materials and removal strategies to mitigate future contamination.
The efficiency of the photomechanical effect in thin films of three azobenzene-based polymers PDR1A, PDR13A, and PMMA-co-PDR1A was determined using a cantilever-based sensor. The polymers were coated onto silicon and mica cantilevers, and the resulting cantilever bending under irradiation with visible light was measured to estimate changes in surface stress, photomechanical energy transduction per unit volume, and overall photomechanical efficiency. The photomechanical response was shown to be robust, repeatable, and quantifiable for all the polymers studied, even when the active polymer layer was much thinner than the cantilever substrate. Among the materials tested, PDR1A generated the largest forces, while PMMA-co-PDR1A exhibited the highest efficiency. For 35-µm-thick mica cantilevers coated with PDR1A, photoisomerization induced rapid and significant cantilever bending in the range of 100s of µm, corresponding to surface stress changes in the range of N/m. These results demonstrate the ability of thin azobenzene polymer films to function as strong, light-driven ‘artificial muscles’ in larger mechanical systems, and highlight the cantilever sensor platform as a powerful tool for the quantitative characterization of photomechanical effects in azo dye-based polymers.
Plastic microbeads, widely incorporated into personal care and cleansing products, have emerged as a pervasive contaminant in freshwater systems, including in North America. Historical estimates indicate that North American consumers alone contributed trillions of microbeads daily to municipal wastewater, with global usage reaching quadrillions per day. Despite regulatory actions such as Canada’s 2018 ban on microbeads in personal care products, these particles persist in the environment due to their resistance to degradation and continued release from unregulated sources, including industrial abrasives and certain cleaning agents. Studies across the Great Lakes, one of the world’s largest freshwater systems, have documented widespread microbead contamination in surface waters, sediments, and shorelines, highlighting their persistence and accumulation. This review synthesizes findings from key studies conducted between 2013 and 2017 to establish a pre-ban baseline of microbead distribution in the Great Lakes, and presents new data collected from 2018 to 2021 as a post-ban contamination assessment. The review emphasizes the unique challenges posed by microbeads within the broader context of microplastic pollution and underscores the critical role of polymer chemists and engineers in developing innovative materials and removal strategies to mitigate future contamination.
This study presents the synthesis and characterization of sub-5 nm neodymium oxide (Nd₂O₃) nanoparticles in methanol, utilizing trioctylphosphine oxide (TOPO) as a capping agent to achieve high chemical purity, phase control, and colloidal stability. By optimizing the NaOH/Nd molar ratio, monodisperse and ultrasmall nanoparticles with excellent optical transparency were produced, as confirmed by transmission electron microscopy, X-ray diffraction, UV-visible, infrared spectroscopy, and inductively coupled plasma analysis. The non-aqueous synthesis route effectively suppressed hydroxide formation, ensuring phase purity and enabling precise size tuning. The resulting Nd₂O₃ nanoparticle suspensions exhibited reversible aggregation and redispersibility, supporting their suitability for high-transparency detector media. These advances address critical requirements for neutrino detection experiments, such as those conducted at the Sudbury Neutrino Observatory (SNO), where minimal optical absorbance and long optical path lengths are essential for optimal performance. The findings inform future strategies for nanoparticle stabilization and integration, paving the way for scalable production of transparent nanomaterial solutions for next-generation neutrino detectors and other optoelectronic applications.