In this work, we fabricated unique fluffy Co/CoO micro-rod composites with various weight ratios between Co and CoO.

Acid mine drainage (AMD) is a typical type of pollution originating from complex oxidation interactions that occur under ambient conditions in abandoned and active mines. AMD has high acidity and contains a high concentration of heavy metals and metalloids, posing a serious threat to ecological systems and human health. Over the years, great progress has been made in the prevention and treatment of AMD. Remediation approaches like chemical neutralization precipitation, ion exchange, membrane separation processes, and bioremediation have been extensively reported. Nevertheless, some limitations, such as low efficacy, excessive consumption of chemical reagents, and secondary contamination restrict the application of these technologies. The aim of this review was to provide updated information on the sustainable treatments that have been engaged in the published literature on the resource utilization of AMD. The recovery and reuse of valuable resources (e.g., clean water, sulfuric acid, and metal ions) from AMD can offset the cost of AMD remediation. Iron oxide particles recovered from AMD can be applied as adsorbents for the removal of pollutants from wastewater and for the fabrication of effective catalysts for heterogeneous Fenton reactions. The application of AMD in beneficiation fields, such as activating pyrite and chalcopyrite flotation, regulating pulp pH, and leaching copper-bearing waste rock, provides easy access to the innovative utilization of AMD. A review such as this will help researchers understand the progress in research, and identify the strengths and weaknesses of each treatment technology, which can help shape the direction of future research in this area.

Water used by mining enterprises needs to be comprehensively recovered and utilized to achieve clean production. This requires the effective treatment of mineral processing wastewater. Wastewater produced during non-ferrous metal mineral processing contains a complex mixture of pollutants at high concentrations, making comprehensive treatment difficult. Here, the sources of and hazards posed by wastewater produced during non-ferrous metal mineral processing are introduced and the techniques for removing heavy metal ions and organic chemicals are reviewed. Chemical precipitation and adsorption methods are often used to remove heavy metal ions. Chemical precipitation methods can be divided into hydroxide and sulfide precipitation methods. Organic chemicals are mainly removed using oxidation methods, including electrochemical oxidation, photocatalytic oxidation, and ultrasonic synergistic oxidation. External and internal cyclic utilization methods for treating wastewater produced by mineral processing plants are introduced, and a feasibility analysis is performed.

In this study, ammonium ion was used to enhance the sulfidation flotation of malachite. The effect of ammonium ion on the sulfidation flotation of malachite was investigated using microflotation test, inductively coupled plasma (ICP) analysis, zeta potential measurements, and scanning electron microscope analysis (SEM). The results of microflotation test show that the addition of sodium sulfide and ammonium sulfate resulted in better sulfidation than the addition of sodium sulfide alone. The results of ICP analysis indicate that the dissolution of enhanced sulfurized malachite surface is significantly decreased. Zeta potential measurements indicate that a smaller isoelectric point value and a large number of copper-sulfide films formed on the malachite surface by enhancing sulfidation resulted in a large amount of sodium butyl xanthate absorbed onto the enhanced sulfurized malachite surface. EDS semi-quantitative analysis and XPS analysis show that malachite was easily sulfurized by sodium sulfide with ammonium ion. These results show that the addition of ammonium ion plays a significant role in the sulfidation of malachite and results in improved flotation performance.

The synergistic effects between sodium dodecyl sulfonate (SDS) and a mixed fatty acids collector for apatite flotation were investigated. SDS benefitted the apatite flotation at pH 9.5. The TOC measurements showed that the addition of SDS improved the surfactants adsorption at the apatite surface. The colloidal size measurements suggested that the utilizing of SDS prevented the over-packing of fatty acids in the solution. Additionally, SDS did not adsorb/co-adsorb at the apatite surface as revealed by the FTIR and XPS results, because of the strong electrostatic repulsion between the apatite surface and the SDS ions.

Xanthate is the most widely used and effective collector in the flotation of sulfide minerals. However, the residual xanthate in flotation wastewater may cause serious environmental pollution and even human health hazards. At present, a variety of treatment technologies have been developed to degrade xanthate pollutants in wastewater, with the aim of meeting safe discharge standards. This work reviews the research status of xanthate wastewater treatment technologies in recent years. Treatment technologies are evaluated, including coagulation flocculation, adsorption, microbiological, Fenton, ozone oxidation, and photocatalytic methods. The reaction mechanisms and advantages, as well as disadvantages, of the various treatment technologies are summarized. Future research on the treatment of xanthate wastewater should focus on combined methods, which will be conducive to achieving a high efficiency and low cost, with no secondary pollution, and with the aim of generating further original and innovative technologies.