Inorganic scintillation crystals have been widely used in applications of high-energy physics, nuclear medical imaging, industrial nondestructive inspection, etc. In this work, a single crystal Ba3Y(PO4)3 (BYP) with 1.0 at% Ce3+-doping concentration was first grown by the Czochralski method, and the electronic structure was calculated using first principles based on density functional theory. In addition, a series of Ce3+-doped BYP phosphors were synthesized, and the fluorescence emission under UV excitation was measured through low-temperature spectroscopy, containing double-peaked emission from 5d–4f transition and self-trapped exciton recombination. A comparison of the UV and X-ray-excited fluorescence spectra reveals the existence of oxygen vacancies as well as F+ centers in the crystal. The air annealing of the crystal effectively reduces the thermoluminescence defects but reduces the emission intensity under UV or X-ray excitation. The BYP:Ce crystal shows a fast decay lifetime of 15.5 ns, and the fast component is as short as 8 ns. The results show that the Ce3+-doped BYP crystal has potential as a kind of scintillator with fast decay properties.
Halide perovskites are emerging as promising materials for photodetection due to their outstanding optoelectronic properties. However, polycrystalline thin films often suffer from significant defects and high dark currents caused by the abundance of grain boundaries, which hinder efficient carrier transport. In contrast, FAPbBr3 perovskite single crystals, with their low defect density and high carrier mobility, are widely used in optoelectronic devices. However, when FAPbBr3 single crystals are exposed to air for a long time, many vacancies are typically generated on the surface, which will capture oxygen from the air. This study found that Cl element doping can prevent FAPbBr3 single crystals from oxidizing, making them highly stable in air. In addition, chlorine (Cl) can extend the growth window of single crystals, allowing the growth of high-quality single crystals at lower temperatures. The resulting FAPbBr2.9Cl0.1 crystals exhibited a resistivity as low as 5.104 × 109 Ω cm, a carrier mobility–lifetime product as high as 3.104 × 10−2 cm2 V−1, a defect density as low as 5.81 × 109 cm−3, and an on/off ratio of up to 2288.27 at a bias voltage of 2 V. These properties highlight the potential of chlorine-doped FAPbBr3 single crystals for high-performance photodetector applications.
Single crystals of Tb3+ single-doped and Tb3+/Pr3+ co-doped CaYAlO4 were produced by the Czochralski method. The room-temperature polarized absorption spectra, emission spectra, and decay curves were recorded and analyzed in detail. The absorption cross-section around 487 nm was found to be 1.53 × 10−22 cm2 for the π polarization in the Tb3+:CaYAlO4 crystal and increased to 5.23 × 10−22 cm2 in the Tb3+/Pr3+:CaYAlO4 crystal. The spectroscopic parameters were calculated through the Judd–Ofelt theory. For the Tb3+:CaYAlO4 crystal, the emission bands of green light at 546 nm and yellow light at 587 nm had fluorescence branching ratios of 64.7% and 6.65% with cross-sections of 8.82 × 10−22 cm2 (σ-polarization) and 0.44 × 10−22 cm2 (π-polarization), respectively. The decay lifetimes of 5D4 multiplets were measured to be 1.41 ms and 1.1 ms for Tb3+:CaYAlO4 and Tb3+/Pr3+:CaYAlO4 crystals, respectively. The energy transfer mechanisms of Tb3+ and Pr3+ and their emission spectral intensities at different temperatures were analyzed. As the temperature increased, the luminescence intensity of the Tb3+:CaYAlO4 and Tb3+/Pr3+:CaYAlO4 crystals decreased almost linearly with the CIE coordinate variation, from (0.370, 0.621) to (0.343, 0.636) and from (0.345, 0.638) to (0.246, 0.698), respectively. The results indicate the potential of Tb3+:CaYAlO4 and Tb3+/Pr3+:CaYAlO4 crystals as visible laser materials with a wide temperature range.
27 June 2024 in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy