Asset Rakishev

Dr. Asset Rakishev

Abylkas Saginov Karaganda Technical University, Karaganda, Kazakhstan
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
SBSheraly Bekbolatov
Sheraly Bekbolatov
ARAsset Rakishev
Asset Rakishev
KJKhairur Rijal Jamaludin
Khairur Rijal Jamaludin
Hybrid additive manufacturing (HAM) integrates additive and subtractive processes within a unified production system, combining the geometric flexibility and material efficiency of additive manufacturing with the dimensional accuracy and surface quality of conventional machining. This review provides a comprehensive analysis of HAM technologies through a proposed four-criterion classification framework encompassing process integration strategy, additive manufacturing process type, machine architecture, and application domain. DED-based, PBF-based, and polymer-based hybrid systems are examined alongside integrated hybrid machines, retrofit solutions, and robotic architectures. A comparative analysis of representative commercial platforms evaluates build envelope, integration strategy, and monitoring capability. Documented performance outcomes across aerospace, automotive, energy, and biomedical sectors confirm substantial improvements in surface quality, fatigue performance, dimensional accuracy, and material efficiency relative to conventional manufacturing routes. Current limitations are critically assessed across technical, process integration, and economic dimensions, and a structured near-to-long-term research roadmap is proposed, prioritising in-process sensing and toolpath standardisation, digital twin-based adaptive process planning, and ultimately autonomous hybrid manufacturing cells with lifecycle certification. These findings position HAM as a central enabling technology for intelligent, flexible, and sustainable production within Industry 4.0 and Industry 5.0 paradigms.

15 September 2025 in Frontiers in Mechanical Engineering
Verified
Journal Article
Open access
PDF file
BDBakhytzhan Donenbayev
Bakhytzhan Donenbayev
KSKaribek Sherov
Karibek Sherov
BMBakhtiyor Mardonov
Bakhtiyor Mardonov
LMLutfiddin Makhmudov
Lutfiddin Makhmudov
SMSabit Magavin
Sabit Magavin
ASAibek Sherov
Aibek Sherov
This study investigates the high‐speed milling behaviour of heat‐resistant martensitic–ferritic steel 15Kh12VMF, widely used in energy and power engineering components but difficult to machine due to its high hardness, strength and low thermal conductivity. An integrated approach combining experimental trials and finite element modelling was applied to assess the influence of cutting parameters on surface quality, tool wear and thermo-mechanical responses. Experiments were conducted on a vertical machining centre under dry cutting conditions using TiAlSiN‐coated carbide tools. Milling parameters were varied within spindle speeds of 2000–12,000 revolutions per minute, feed rates of 500–4500 mm/min and cutting depths of 1–5 mm. Surface roughness was measured according to ISO 4287 standards. Finite element simulations were performed in ANSYS Workbench using the Johnson–Cook constitutive and damage models to reproduce chip formation, temperature distribution and cutting forces. Results indicated that increasing spindle speed from 3000 to 6000 revolutions per minute reduced surface roughness by up to 18%, whereas higher feed rates and depths of cut increased it by 25% and 32%, respectively. Optimal parameters were identified as 6000 revolutions per minute, 1500 mm/min and 2 mm. Tool wear accelerated beyond 6000–7000 revolutions per minute due to elevated cutting temperatures. Simulations predicted a peak temperature of 291.47 °C and cutting forces between –2500 N and +7500 N, consistent with experiments. This study provides validated reference data and modelling insights to support parameter optimisation and improve high-speed milling performance of martensitic–ferritic steels.

15 April 2021 in Series of Geology and Technical Sciences
Verified
Journal Article
Open access
ASA. K. Sherov
A. K. Sherov
DAD. E. Alikulov
D. E. Alikulov
YSYu. M. Smirnov
Yu. M. Smirnov
KSKaribek Tagaevich Sherov
Karibek Tagaevich Sherov
ARAsset Rakishev
Asset Rakishev
AMA. V. Mazdubay
A. V. Mazdubay
This article presents the results of a study of the process of internal fluid leakage in the design of a gear pump with a biaxial connection. It is known that the volumetric efficiency mainly depends on the leakage of the working fluid through the gaps formed by the tooth heads and the pump casing, as well as between the end surfaces of the gears and the side walls of the casing. In addition, additional leaks occur along the contact line of the teeth. To reduce radial leaks, the gap between the gears and the pump casing is minimized, and to reduce end-leakage, the side walls are automatically pressed against the end surfaces of the gears by liquid under operating pressure. The design of the pump shows that the main internal fluid leaks occur in the gap between the gears and the housing. Naturally, these leaks require excessive energy consumption and, thereby, reduce the efficiency of the pump. The natural way to combat this circumstance is to reduce the marked gaps to a minimum. This is possible using an additional element - a biaxial sleeve. The dependence of the spring force on the fluid flow rate and the guaranteed gap between the ring gear and the pump casing has been analytically established. They are characterized by a drop in force with an increase in clearance and a rise in flow rate. This is due to an increase in the dynamic force in the gaps, which must be compensated by the spring.

30 December 2024 in Science and Technology of Kazakhstan
Verified
Journal Article
Closed access
ЕИЕ. Е. Исенов
Е. Е. Исенов
ARAsset Rakishev
Asset Rakishev
BDBakytzhan Donenbayev
Bakytzhan Donenbayev
Берілген мақалада экструдер геометриясының механикалық қасиеттеріне, атап айтқанда, кернеу мен деформацияға әсері жан-жақты зерттелді. Зерттеу ANSYS Workbench (WB) бағдарламасында геометриялық параметрлерді өзгерту арқылы жүргізілді, оның ішінде экструдердің қабырға қалыңдығының механикалық мінез-құлқына әсері терең талданды. Алынған нәтижелер қабырға қалыңдығын ұлғайту құрылымдық қатаңдықтың жоғарылауына, нәтижесінде деформацияның азаюына алып келетінін көрсетті. Сонымен қатар, қабырға қалыңдығы белгілі бір шекке жеткенде, кернеулердің төмендеуі байқалды. Бұл құбылыс экструдерлерді жобалауда қабырға қалыңдығының оңтайлы мәндерін анықтаудың маңыздылығын айқындайды. Қабырға қалыңдығының өзгеруі экструдердің деформацияға және динамикалық жүктемелерге төзімділігін арттырып, оның жұмысындағы сенімділікті едәуір жақсартады. Оңтайлы қабырға қалыңдығын таңдау экструдердің тиімділігін арттырып, жұмыс мерзімін ұзартады. Алынған нәтижелер экструдердің механикалық қасиеттерін жақсартуға, оның беріктігін арттыруға және ұзақ мерзімді сенімділігін қамтамасыз етуге мүмкіндік береді. Зерттеу нәтижелері өндіріс саласында экструдерді қолдану тиімділігін арттырып қана қоймай, оның қызмет ету мерзімін ұзартуға бағытталған шешімдерді енгізуге ықпал етеді. Бұл өндіріс сапасын жақсартуға көмектеседі. Мақалада көрсетілген әдістеме жобалау процесін едәуір жылдамдатып, тиімді әрі экономикалық шешімдер жасауға мүмкіндік береді. Жұмыстың нәтижелері инженерлер мен жобалаушыларға экструдердің құрылымдық параметрлерін оңтайландыруға нақты ұсыныстар береді, бұл өндірістің сапасын арттырып, шығындарды азайтуға мүмкіндік береді. Кілтті сөздер: экструдер, параметрлеу, ANSYS Workbench, механикалық қасиеттер, 3Д қүрылыс принтер.

27 August 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Gulim TattimbetovaGulim Tattimbetova
Gulim Tattimbetova
OKOleksandr Kapustynskyi
Oleksandr Kapustynskyi
ARAsset Rakishev
Asset Rakishev
JŠJelena Škamat
Jelena Škamat
ZGZhetessova Gulnara
Zhetessova Gulnara
Material extrusion (MEX) enables rapid fabrication of single-use polymer casting patterns for foundry and mechanical engineering applications, where handling strength and surface texture are critical. This study examines how infill pattern, density, and orientation affect the mechanical and surface properties of samples printed from ELEGOO PLA on a Bambu Lab A1 using Bambu Studio 2.5.0. Two infill types (triangle, grid), two densities (50%, 70%), and five orientations were evaluated via uniaxial tension, fixed-deflection three-point bending, line-profile and areal surface texture measurements, and SEM fracture analysis. Tensile strength ranged from 23.60 to 29.19 MPa. Raising infill density from 50% to 70% increased mean tensile strength from 24.62 to 27.65 MPa. The highest tensile strength, 29.19 MPa, occurred for a 70% grid infill at 75° orientation; the highest bending load at 4 mm midspan deflection, 107.97 N, occurred for a 70% grid infill at 15°. Across the descriptive surface dataset, differences among the top, side, and bottom surfaces were greater than the variations associated with infill orientation. Top, side, and bottom surfaces formed via different mechanisms; the relatively high bottom-surface roughness arose from replication of the textured PEI build plate. The selected lower-density fracture surfaces exhibited more pronounced visible gaps and inter-bead discontinuities in the SEM images. Within the tested range, the 70% grid infill produced the best overall mechanical performance. These findings are specific to the ELEGOO PLA–Bambu Lab A1–Bambu Studio 2.5.0 system and should not be interpreted as intrinsic PLA properties, used for direct cross-material benchmarking, or assumed to represent behavior under industrial foundry conditions. Instead, they provide system-specific screening data for selecting candidate infill configurations and for the subsequent evaluation of this commercial MEX printing platform for producing single-use polymer casting patterns for complex-geometry components in mechanical engineering under representative foundry conditions.

7 October 2025 in International Journal of Innovative Research and Scientific Studies
Verified
Journal Article
Open access
BDBakytzhan Donenbayev
Bakytzhan Donenbayev
KSKaribek Tagaevich Sherov
Karibek Tagaevich Sherov
MBMadi Bakirov
Madi Bakirov
GTGulzada Tazhenova
Gulzada Tazhenova
ARAsset Rakishev
Asset Rakishev
This study investigates the thermo-mechanical behaviour of titanium alloys during milling with the aim of developing a predictive approach for reducing thermal loading and improving process stability. A three-dimensional finite element model was constructed in Kompas-3D and simulated in ANSYS Workbench using the Johnson–Cook constitutive and damage model. To systematically analyse the effects of process variables, a five-level experimental design was employed, in which cutting depth, feed rate, and spindle speed were varied. The results of 25 simulation runs were processed in ANETR-5 software to establish a regression model linking cutting parameters with the workpiece surface temperature. The findings revealed that heat accumulation is strongly localised at the tool–chip interface, while subsurface temperature stabilises near 101.9 °C. Cutting forces were observed to fluctuate in all coordinate directions, reflecting the intermittent engagement of milling teeth and providing insight into potential process instability. The regression model demonstrated high adequacy with SD = 28.76%, R = 0.948, and F = 12.093. Optimisation indicated that the combination of cutting depth t = 1 mm, feed rate S = 4500 mm/min, and spindle speed n = 4162 rpm yields the most favourable thermal response. The approach provides a reliable basis for optimising titanium machining, improving tool life, surface integrity, and overall cost efficiency.