In the present research, acrylic rubber (ACM) composites containing Carbon black (CB) of 70 phr alone and five different ACM hybrid nanocomposites containing a fixed content of CB (60 phr) and varied content of halloysite nanotubes (HNT) (2, 4, 6, 8 and 10 phr) were prepared by melt-blending on a open twin roll mill. The prepared composites were examined for their microstructure, physical and mechanical properties, hot air and hot oil ageing resistance. Studies revealed that addition of HNT in CB filled ACM composites resulted in superior mechanical properties, improved swelling resistance and augmented impedance to oxidation and hot oil compared to ACM containing CB alone. Further ACM composites with 6 phr of HNT demonstrated an enhancement of 31.49%, 16.15%, 39.65%, 6.39% and 28.06% respectively in stress at break, % elongation at rupture, modulus at 100% elongation, resistance to crack propagation and solvent uptake. Further the same sample exhibited retention of stress at break and elongation at rupture of 99% and 92%, 98% and 89%, 94% and 96% respectively in hot air, in IRM 901 oil and in IRM 903 oil respectively. Studies on the microstructure revealed the formation of HNT-ACM-CB intercalated structures. Fourier transform infrared spectroscopy studies confirmed the establishment of bonding of hydrogen amidst the tubular nanofiller and the ACM rubber. Field emission scanning electron microscopy studies divulged the intercalation of tubular filler by ACM rubber, black filler and curing constituents and development of local HNT-CB network. These studies prove that partial replacement of traditional CB filler with tubular HNT is a promising approach to produce ACM composites with superior mechanical, thermo-oxidative ageing and hot oil ageing properties.
29 December 2022 in Advances in Materials Science and Engineering
In this study, we show that adding halloysite nanotubes (HNT) to carbon black (CB)-packed acrylic rubber (ACM) composites improves their thermal properties. The thermo-oxidative stability, thermal stability, and dynamic mechanical properties of ACM composites (filled simply with 70phr CB) and ACM hybrid composites comprising a fixed amount of CB (60phr) and a variable amount of halloysite nanotubes (HNT) (2, 4, 6, 8, and 10phr) were investigated. As evidenced by the oxidation induction time analysis, hybrid structures support a higher degree of antioxidation in composites reinforced with twin fillers than composites reinforced just with CB. ACM composites with dual fillers had greater breakdown temperatures (temperatures at 10 weight loss (T10) and 50 weight loss (T50)) and char residue concentration at 600°C than ACM conventional composites, according to thermogravimetric tests. The activation energy of the thermal disintegration of ACM composites, as determined by the Kissinger and FlynnWallOzawa techniques, shows that the addition of HNT improves the thermal stability of ACM composites. The storage modulus of ACM composites was increased by 79 percent at 30°C when 10phr of black filler was replaced with 6phr of tubular HNT, according to additional viscoelastic experiments.
Due to their lightweight, new classes of materials including aluminium-based Metal Matrix Composites (MMCs) have been popular in recent years in various industries including aircraft and automobiles. Because of its low cost and ease of availability, aluminium alloy (LM13) MMCs were developed using Rice husk ash (RHA) as reinforcement in this study rather than traditional reinforcement and composites were prepared using the stir casting technique. LM13-15wt.%RHA composite was chosen for the present machining study. The central composite design (CCD) with three input parameters at three levels based on the best outcomes was adopted for this experimental study. A mathematical model was developed to predict the machining responses of Material Removal Rate (MRR) and surface roughness. The most significant variables were evaluated using ANOVA. The main and interactive effects of the input variables on the predicted responses are determined. The experimental and predicted values are nearly identical, indicating that the developed models can accurately predict responses. The optimal value of the turning parameters was obtained from desirability analysis. The obtained desirability value for turning parameters is 0.863, and for output response, the value of desirability for surface roughness is 0.71663 and for MRR is 0.747491, and combined desirability is 0.731898