In this paper, the modeling and the optimization of the removal efficiency of ketoprofen (KTP) by the electrocoagulation process were studied. The central composite design experiments (CCD) method was used to study the main effects and the interaction effects between operational parameters and to optimize the value of each parameter. According to the regression equation obtained, the current density appears to be one of the most important parameters (b2 = +22.11) controlling the removal efficiency of KTP. The positive sign of b2 coefficient suggests that the increase of current density increases the yield of removal. The second significant parameter with a negative effect was the initial KTP concentration (b3 = −16.27). This result suggests that the removal efficiency was inversely proportional to the initial concentration. In addition, according to the model, the most influencing interactions were pH-current density, pH-initial concentration, and current density-initial concentration. The model obtained by CCD led to the following optimal conditions for KTP removal efficiency (96.70%): pH = 7, i = 24.04 mA cm−2, and C0 = 5 mg L−1.
This work investigates the possibility to use the reed as an adsorbent for removal of basic yellow 28 (BY28), an industrial textile dye from aqueous solution. Batch adsorption experiments at 258 °C and agitation speed of 400 rpm were carried out and the effects of operational parameters including contact time, initial dye concentration, adsorbent dose, as well as solution pH on sorbed amount were investigated and discussed. The maximum uptake of BY28 was about 140 mg/g of adsorbent and it was obtained at pH6, initial dye concentration of 100 mg/L, and adsorbent dose of 0.5 g/L. It was also established that almost 15 min are sufficient to attain equilibrium sorption. Results of batch experiments showed that this adsorbent exhibited high sorption capacities toward BY28. Experimental data were analyzed using pseudo-first-order and pseudo-second-order kinetics and it was found that kinetic followed a pseudo-second-order equation. The equilibrium results have been modeled and evaluated using Langmuir, Freundlich, Sips, and Generalized model isotherms. The Langmuir model provides the best fit of equilibrium data of BY28 and according to this model, the maximum sorption capacity was estimated to181 mg/g of reed. FTIR spectrum of reed confirms the existence of various functional groups such as carboxyl, phenolic, hydroxyl, and amine groups on their surface and these functional groups have always been considered to effectively form some physicochemical interactions, e.g. ion exchange or inner-sphere complex formation, with BY28. Results from this study suggest that reed is an effective adsorbent for the removal of BY28 from aqueous solutions.
28 August 2020 in Reaction Kinetics, Mechanisms and Catalysis
In this work, inexpensive and easily available olive stones (OS) waste was used as source material to prepare activated carbons (ACs) by chemical activation with phosphoric acid and zinc chloride. The mixture design of experiments (MDOE) method was applied to study the effect of the composition of the mixture of unmodified olive stones (UOS) and ACs prepared from olive stones activated with ZnCl2 (ACOS ZnCl2) and H3PO4 (ACOS H3PO4) on the absorption of pharmaceutical residues. The adsorbed tetracycline (TC) amounts at equilibrium predicted from the model equation developed using Microsoft EXCEL software were found to be in good agreement with the experimental values (R2 = 0.999). Based on the results of the model, the amount of TC removed increases as the proportion of ACOS H3PO4 in the adsorbent mixture increases and the highest amount of adsorbed TC is obtained with an adsorbent made up entirely of ACOS H3PO4. Adsorption tests of sulfamethazine (SMT) and amoxicillin (AMX) on ACOS H3PO4 separately showed that the SMT is adsorbed better (189.81 mg/g) followed by the TC (183.11 mg/g) then the AMX (155.69 mg/g). However, when these molecules are present together in the same solution, it is the tetracycline that adsorbed best followed by the SMT then the AMX. In addition to this, the sorption process studied is best described by a pseudo first order model and it is the Langmuir model that satisfactorily describes the equilibrium data.