Double deformable mirrors (DMs) with different actuator densities are cascaded to optimize the wavefront aberrations to improve the focus intensity of the Shanghai super-intense ultrafast laser facility (SULF), which plans to generate 10 PW laser pulse. The beam aberrations near the focal spot are corrected from 0.556 um to 0.112 um in RMS by a 300-mm DM with a large stroke installed after the compressor. After then, it is further optimized to 0.041 um using a 130-mm DM with a high spatial resolution working after the main amplifier. The corrected beam is focused to 2.75 × 2.87 um2 at the full width at half maximum (FWHM) with an f/2.5 off-axis parabolic mirror (OAP), which contains approximately 27.69% energy. A peak intensity of 2 × 1022 W/cm2 is achieved at the output of 5.4 PW, and it could exceed 1023 W/cm2 in the SULF 10 PW laser facility using an f/1.8 OAP.
In this letter, we report the demonstration of terawatt (TW)-scale femtosecond vortex laser pulses based on noncollinear optical parametric chirped-pulse amplification (OPCPA) centered at 800 nm. To the best of our knowledge, this is the first experimental study of amplification for OPCPA-based vortex pulses to achieve a powerful ultrafast (TW-scale) vortex pulse output. In this experiment, a 0.5-mJ broadband chirped vortex pulse was amplified to 47 mJ with a 15-mm-long LiB3O5 crystal. The double-pass grating pair compressor with an efficiency of 65% maintained the beam vortex, and a pulse of width 30.1 fs was obtained, corresponding to a peak power of 1.02 TW. This laser can be used in studies on nonlinear optics and relativistic laser-plasma interactions, compact plasma-based accelerators, and light sources.
In this study, we numerically simulate the evolution of the orbital angular momentum (OAM) spectrum of a vortex laser beam in the optical parametric chirped pulse amplification (OPCPA) process, which is an effective technical method to realize ultra-intense and ultra-short vortex laser amplification. The results show that the proportion of the vortex laser beam with 100% topological charge (TC) of 1 decreases to 97.44% with the enhancement of the saturation amplification after amplification by a 15 mm length LBO pumped by a 526.5 nm laser with a pump intensity of 1.74 GW/cm2. Conversely, the beams with other topological charges generate and increase with the amplification. The simulation results are consistent with our previous experimental results. Meanwhile, compared with non-collinear OPCPA, collinear OPCPA can maintain well the proportion of TC $$l = 1$$ .