The lack of freshwater and the low efficiency of the traditional solar stills have led to the search to find a technology that can enhance desalination by use of vacuum-enhanced solar still technology. This review intends to investigate the impact of integrating a vacuum into solar stills, which include vacuum membrane distillation (VMD), nanoparticle-enhanced solar stills, multi-effect/tubular solar stills, geothermal integration and parabolic concentrator solar stills. The most important findings show that the productivity improves greatly: vacuum-assisted solar stills give up to 133.6% more product using Cu2O nanoparticles, and multi-effect tubular stills under vacuum (40−60 kPa) show a doubling in freshwater productivity (7.15 kg/m2) in comparison to atmospheric operation. Geothermal cooling and vacuum pump systems show a 305% increase in productivity, and submerged VMD reached 5.9 to 11.1 kg m−2 h−1 with solar heating. Passive vacuum designs further reduce the energy used down to a specific cost, using as little as USD 0.0113/kg. Nevertheless, membrane fouling, initial cost, and the complexity of the system can still be termed as the challenges. This review highlights the significance of vacuum-enhanced solar stills to address the critical issue of freshwater scarcity in arid regions. The integration of vacuum membrane distillation, nanoparticle and heat recovery into vacuum-enhanced solar stills enabled us to improve the economic feasibility. We conclude that vacuum technologies significantly boost the efficiency and economic feasibility of solar desalination as a potential approach to sustainable desalination. Specifically, these inventions will contribute to providing a renewable and cost-effective solution for freshwater production. Further investigations are required to overcome the existing challenges, such as system complexity and membrane fouling, to effusively comprehend the efficacy of vacuum-enhanced solar stills to ensure sustainable water management.
To scientifically address the low productivity issue of traditional solar desalination systems, the current review intends to investigate the effect of design changes and performance improvement of solar stills with external and internal condensers. This review highlights that elements such as coolant techniques, the geometry of the condenser, and material features (e.g., nanofluids or surfaces of wettability) have a pivotal impact on maximising output. The results show that the combination of external condensers in solar stills is remarkably effective, where the efficiency ranges between 24% and 165% in distillate yield depending on the design modifications, which include the use of nanofluids, reflectors, and phase change materials (PCMs). In this regard, internal condensers explicitly display significant performance advances, with water production improvements of more than 150% in improved stepped designs and 60% in capillary film designs. To guarantee the maximum production of fresh water, this review proposes a number of adjustments to elevate the overall performance of solar stills, such as condensers with enhanced mechanisms of heat transfer or passive cooling strategies, which enable solar stills to be more practical in achieving the sustainable desalination of water across a wide range of climatic regions. Indeed, the enhancement of the efficiency of solar desalination technologies would support the United Nations Sustainable Development Goal 6 (Clean Water and Sanitation), providing access to safe and affordable drinking water for all.