Micro-electromechanical systems (MEMS) magnetic sensing at high temperatures over 573 K has not been achieved due to the difficulty in designing the rational interface with strong coupling. Here, a magnetic sensor based on FeGa/single-crystal diamond (SCD) MEMS resonator is realized to circumvent the challenges in magnetic sensing. The present magnetic sensor exhibits a stable high-sensitivity of 7.3 Hz/mT at 573 K and an experimental noise level of ~4nT/√Hz. The performance exceeds those of reported high-temperature magnetic sensors. This work offers a strategy for developing magnetic sensors with merits super to the existing ones. GRAPHICAL ABSTRACT IMPACT STATEMENT The first high-temperature MEMS magnetic sensor over 573 K super to the present ones is realized by coupling a magneto-strictive FeGa film with a diamond MEMS resonator.
Self-powered solar-blind UV detectors are playing an increasingly critical role in the sustainable development of photodetectors with low energy consumption. In this work, the design of electrode structures, including an asymmetric-size structure and an asymmetric-material structure, was proposed to achieve self-powered photodetection function for the solar-blind UV a-Ga2O3 based photodetectors with metal–semiconductor–metal (MSM) structures. The results indicate that the Au/Ti/Ga2O3/Ti/Au photodetector with an asymmetric-electrode-size shows photodetection performances of responsivity (R), external quantum efficiency (EQE), and detectivity (D*) of 0.149 mA W−1, 0.07%, and 3.1 × 109 cm Hz1/2 W−1@0 V, respectively. The asymmetric-electrode-material photodetectors with Au/Ti/Ga2O3/GZO and Au/Ti/Ga2O3/Au structures possess photodetection performances of R, EQE, and D* of 0.591 mA W−1, 0.29%, and 2.9 × 109 cm Hz1/2 W−1 and 0.148 mA W−1, 0.07%, and 7.8 × 108 cm Hz1/2 W−1@0 V, respectively. The electrodes with the asymmetric-size structure and the asymmetric-material structure result in different Schottky barrier heights in the interfaces of the electrodes and films, which are favorable for realizing self-powered performance. The self-powered solar-blind UV a-Ga2O3 based photodetectors have a fast photo-response speed, high stability and high repeatability. These findings provide a promising and facile route to fabricate a-Ga2O3 self-powered solar-blind UV photodetectors with high photodetection.