This research evaluates the modification of the lithium carbonate (Li2CO3) production process and particularly the boron removal step, which currently employs a recirculated stream. This recirculated stream is a liquor with low boron content but rich in lithium, currently being wasted. In this process, the recirculating stream is substituted with a freshwater stream. Boron is re-extracted from the loaded organic stream to form an input stream for a boric acid process. Under certain operational conditions, the formation of emulsions was observed; due to this, the analysis of emulsion formation involved controlling the pH of each sample, which lead to the development of a procedure to prevent such formations. From this analysis, it was determined that emulsions form in water with pH values below 1.3 and above 6.9. In addition, a speciation analysis showed that the concentrations of the H2BO3− and H+ species influence the formation of emulsions. The mass balance of the process showed that by replacing the recirculated stream, boron recovery of 89% was achieved, without the need to add new stages or equipment.
Copper is a critical resource for the energy transition and the development of novel sustainable processes for its recovery must be a focus of research. The use of deep eutectic solvents (DES) is an alternative for the solvometallurgical extraction of copper from sulfide ores with low or zero water consumption. The objective of this research is to study the dissolution of low-grade copper sulfide ore (0.83% Cu) using deep eutectic solvents. Laboratory scale agitation leaching tests were performed using different DES based on choline chloride (ChCl), namely ChCl-ethylene glycol, ChCl-citric acid, and ChCl-urea, at different temperatures (25, 50, and 60 °C). The effect of water and hydrogen peroxide was also studied in some systems. The best copper extractions were achieved with ChCl-citric acid > ChCl-urea > ChCl-ethylene glycol, reaching ≈99% copper extraction in some cases. This mineral leaching process offers an alternative to the processing of sulfide minerals and could be a technique that allows the use of solvent extraction and electrodeposition facilities available at a metallurgical plant, with less water consumption than the traditional leaching process.