Fiber-reinforced polymer (FRP) bars and fiber-reinforced concrete (FRC) are composite materials that have found acceptance in current construction systems due to their high strength-to-weight ratio, durability, and ease of installation. This study presents an experimental and analytical study on the potential of these materials to improve the seismic behavior of low-rise shear walls. Two low-rise concrete shear walls with similar geometry were tested up to failure under pseudostatic lateral cyclic loads. The first wall was a steel-RC low-rise shear wall, compliant with seismic considerations of North American codes for structural reinforced concrete. The second was a steel fiber-reinforced concrete (SFRC) wall reinforced with a hybrid scheme of FRP-steel bars as flexural reinforcement. The FRP bars had the purpose of enhancing the self-centering capacity of the wall, while the SFRC helped to mitigate the damage experienced by the concrete. The goals were achieved reasonably in the testing phase. A finite-element analysis model for low-rise hybrid shear walls was developed and verified with experimental results. The analysis model is able to predict system performance variables with satisfactory accuracy for both walls, such as force-displacement relationship, stiffness, and energy dissipation. The experimental and analytical results show that the hybrid glass fiber-reinforced polymer (GFRP)-steel reinforced walls can achieve similar strength, stiffness, and ductility levels to RC construction while experiencing less residual displacements.
Contemporary structures can resist earthquakes as they deform and dissipate energy. However, during strong ground motions, these structures can sustain significant concrete damage and overall permanent deformations. Therefore, it is of great benefit if earthquake-resisting structures can deform and dissipate energy, and yet sustain mitigated damage. This paper illustrates the findings of an experimental study focused on the mitigation of damage and reduction of residual displacements in reinforced concrete (RC) shear walls. In this study, the cyclic properties of two innovative shear walls—a slender and a squat wall—which were cast with fiber-reinforced cementitious composites and reinforced with steel and glass fiber reinforced polymer bars are investigated. Then, the improvements of the innovative specimens with respect to two conventional RC shear walls are discussed in terms of damage propagation, self-centering, stiffness retention and energy dissipation. As the experiments showed, the innovative walls sustained mitigated concrete damage and less residual drift ratios while illustrating significant stiffness and energy dissipation capacities.