This study evaluated the effectiveness of using externally bonded carbon fiber–reinforced polymer (CFRP) sheets to enhance the seismic performance of nonductile reinforced concrete shear wall specimens representative of low aspect ratio walls. The specimens were designed to replicate structural deficiencies typically found in older concrete structures constructed during the 1960s and 1970s. The nonductile reinforcement details included insufficient shear reinforcement, lack of boundary elements, and low concrete compressive strength. The specimens were repaired or strengthened using vertical and horizontal CFRP sheets and then cyclically tested to simulate seismic loading. A tube anchor system was used to transfer the tensile force carried by the CFRP sheet to the foundation of the specimens. Experimental results showed that the CFRP retrofitting system was able to restore the original strength and initial stiffness of severely damaged specimens and significantly increase the flexural strength, du...
Due to the energy and environmental impacts attributed to the operational phase of the building sector, efforts have been made to improve building energy performance through the implementation of restrictive energy requirements by regulatory bodies. In this context, the primary objective of this paper is to investigate and compare regulations that govern the building envelope energy performance of new residential buildings in cold-climate regions, primarily in Canada, Finland, Iceland, Norway, Sweden, China, and Russia. The aim is to identify similarities and dissimilarities among the energy regulations of these countries, as well as potentials for development of more effective building codes. This study verifies that the investigated energy requirements diverge considerably—for instance, the required thermal resistance per unit area of above-grade exterior walls in Sweden is almost two times that of a similar climate zone in Canada. Based on the comparisons and case analyses, recommendations for energy requirements pertinent to building envelope of new residential buildings in cold-climate regions are proposed.
Contemporary structures can resist earthquakes as they deform and dissipate energy. However, during strong ground motions, these structures can sustain significant concrete damage and overall permanent deformations. Therefore, it is of great benefit if earthquake-resisting structures can deform and dissipate energy, and yet sustain mitigated damage. This paper illustrates the findings of an experimental study focused on the mitigation of damage and reduction of residual displacements in reinforced concrete (RC) shear walls. In this study, the cyclic properties of two innovative shear walls—a slender and a squat wall—which were cast with fiber-reinforced cementitious composites and reinforced with steel and glass fiber reinforced polymer bars are investigated. Then, the improvements of the innovative specimens with respect to two conventional RC shear walls are discussed in terms of damage propagation, self-centering, stiffness retention and energy dissipation. As the experiments showed, the innovative walls sustained mitigated concrete damage and less residual drift ratios while illustrating significant stiffness and energy dissipation capacities.
1 September 2022 in Canadian Journal of Civil Engineering
To study corrosion effects on real structures, three prestressed concrete (PC) girders salvaged from a decommissioned 27-year-old bridge in Alberta, Canada, were studied numerically and compared to experimental tests. Nonlinear finite element (FE) models were developed to simulate the degraded flexural and shear behaviour of PC girders. The FE models were used to infer the possible unknown deterioration conditions (i.e., forensic analysis) by comparing FE-predicted and experimental behaviour of the girders. Based on the developed FE models, comprehensive parametric studies considering various corrosion-induced deteriorations at a wide range of corrosion levels were also conducted. Insights gained from the parametric study assisted assessing other girders under similar conditions. It was found that corrosion defects, such as reinforcement area loss, prestress force loss, and bonding loss in the end anchorage, affect PC girder behaviour significantly and the developed FE models of corroded PC girders can assist girder condition assessment.
11 December 2025 in Discover Artificial Intelligence
The growing integration of artificial intelligence (AI) in education, particularly through AI chatbots powered by large language models (LLMs), requires careful evaluation of their benefits and limitations. This study examines the potential of three leading AI chatbots—ChatGPT, Gemini, and DeepSeek—as educational tools for civil engineering students by evaluating their performance on the fundamentals of engineering (FE) civil exam. Using a standardized dataset, chatbot responses were analyzed across three criteria: Final Answer Correctness, Conceptual Understanding, and Correct Use of Equations. Indicative results show that ChatGPT o3, ChatGPT-4o, DeepSeek-R1, and Gemini 2.5 Pro achieved accuracies above 70%, while DeepSeek-V3 and Gemini 2.0 Flash scored above 60%. Performance was highest in foundational subjects introduced early in engineering curricula and lowest in advanced, domain-specific areas, indicating the need for enhanced reasoning capabilities and targeted domain training. In addition, the performance of AI chatbots was further analyzed by comparing their accuracy on text-based versus image-based questions. Accuracy was significantly higher for text-based questions (average 87%) compared to image-based questions (42%), revealing current limitations in visual interpretation. These findings suggest that while AI chatbots can potentially serve as practical tutoring tools for early-stage learners, further refinement is needed for complex, visual, or advanced engineering tasks. This study contributes to understanding the role of AI in civil engineering education and informs strategies for its integration into academic practice.
Space heating and cooling of buildings is a major contributor to the ascending trend of global energy consumption and greenhouse gas (GHG) emissions. A potential solution to reduce the space heating and cooling is to use buildings’ mass for active thermal energy storage (TES). Having air circulation between an active TES and its associated zones can significantly enhance their thermal coupling; however, reported research studies have not focused on this kind of active TES. To that end, this study aimed to evaluate the thermal performance of a ventilated block wall (VBW) in reducing space heating and cooling loads in cold-climate buildings. In this system, air is circulated between a zone and the voided cores of a VBW, where the air exchanges heat with the wall before returning to the zone. To have a generalizable assessment of the system’s performance, typical-day and annual energy analyses were conducted under various boundary conditions and air circulation speeds. The study found that for a typical day with significant temperature fluctuation, a VBW with a 2 m/s air circulation speed throughout the day can lead to 67% more net energy exchange (the sum of thermal energy storage and release) when compared to having no air circulation. The annual analysis compared the energy performance between a VBW and a traditional wood-frame wall in three different cold climates. The results showed that substituting a wood-frame wall with a VBW can reduce space heating and cooling loads by 35.1 kWh/m2 (wall surface area) for a mixed dry–cold climate throughout the year. Having cement plaster as interior finishing can lead to 9% more net energy exchange than having drywall, on average, for all zone air temperature profiles.