Philipp Rank

Mr. Philipp Rank

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2023 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
SMSebastian Johann Müllner
Sebastian Johann Müllner
THT. Held
T. Held
TTT. Tichter
T. Tichter
PRPhilipp Rank
Philipp Rank
DLD. Leykam
D. Leykam
CRChristina Roth
Christina Roth
Most high capacity anode materials for lithium-ion batteries (LiB) require a carbonaceous matrix. In this context one promising material is reduced graphene oxide (rGO). Herein, we present the influence of different reduction degrees of rGO on its physico-chemical properties, such as crystallinity, specific surface area, electrical conductivity and electrochemical lithiation/delithiation behavior. It is found that a heat treatment under inert and reducing atmospheres increases the long-range order of rGO up to a temperature of 700 °C. At temperatures around 1000 °C, the crystallinity decreases. With decreasing oxygen content, a linear decrease in irreversible capacity during cycle 1 can be observed, along with a significant increase in electrical conductivity. This decrease in irreversible capacity can be observed despite an increase in specific surface area indicating the more significant influence of the oxygen content on the capacity loss. Consequently, the reversible capacity increases continuously up to a carbon content of 84.4 at% due to the thermal reduction. Contrary to expectations, the capacity decreases with further reduction. This can be explained by the loss of functional groups that will be lithiated reversibly, and a simultaneous reduction of long-range order, as concluded from dq/dU analysis in combination with XRD analysis.

22 October 2025 in Batteries
Verified
Journal Article
Open access
PDF file
PRPhilipp Rank
Philipp Rank
SMSebastian Johann Müllner
Sebastian Johann Müllner
TGThorsten Gerdes
Thorsten Gerdes
CRChristina Roth
Christina Roth
The thermal characteristics and surface properties of battery separators are commonly modified by the incorporation of inorganic particles into a polymeric matrix material. At present, the particles employed are predominantly of an arbitrary shape. Herein, we demonstrate significantly improved battery safety features using a glass-based separator consisting of platelet-shaped particles. Glass is selected due to its temperature stability and the freedom of design that it offers when particles are formed directly from the melt. The influence of the particles’ aspect ratio and layer stacking on the electrochemical properties was analyzed, and a parametric study of glass particle layers as function of edge length and thickness was conducted. Particles with an excessively high aspect ratio impede the Li+ diffusion pathway, thereby negatively affecting the performance and stability of the battery cell. Conversely, if the aspect ratio is insufficient, a deterioration in cell performance can be observed, particularly at elevated C-rates, due to the high specific surface area of the particles. Hence, the utilization of particles with a moderate aspect ratio of about 10 and a thickness of around 1 µm is proposed to ensure optimum performance.

31 March 2025
Verified
Preprint
Open access
PRPhilipp Rank
Philipp Rank
SMSebastian Müllner
Sebastian Müllner
TGThorsten Gerdes
Thorsten Gerdes
CRChristina Roth
Christina Roth
A common methodology to modify both the thermal characteristics and surface properties of battery separators is the incorporation of particles. At present, the particles employed are predominantly of an arbitrary shape. The enhanced mechanical stability of particle layers comprising platelet-shaped particles is demonstrated and further evaluated on the influence of their aspect ratio (edge length to thickness) on the electrochemical properties of battery separators. Glass is selected as the particle material due to its temperature stability and the freedom of design that it offers when particles are formed directly from the melt. A parametric study of glass particle layers as function of edge length and thickness is conducted. Depending on the electrochemical characterization method, symmetrical cells with stainless steel electrodes and graphite-lithium half cells are used. Particles with an excessively high aspect ratio impede the Li+ diffusion pathway, thereby negatively affecting the performance and stability of the cell. Conversely, if the aspect ratio is insufficient, a deterioration in cell performance can be observed, particularly at elevated C-rates, due to the high specific surface area of the particles. An optimum performance can be achieved by utilizing particles with an aspect ratio of about 10 and a thickness of around 1 µm.

22 December 2023 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
PRPhilipp Rank
Philipp Rank
SSSarah Spreng
Sarah Spreng
SMSebastian Johann Müllner
Sebastian Johann Müllner
CRChristina Roth
Christina Roth
TGThorsten Gerdes
Thorsten Gerdes
Lithium-ion batteries (LIBs) are one of the most important and common energy storage technologies for mobile devices as well as electric vehicles due to their high specific energy density [1]. However, there are still safety concerns in case of overcharge or mechanical damage. The separator as the passive safety-relevant component is placed between the two electrodes to prevent internal short-circuits. Nevertheless, accidental or inhomogeneous deposition of metallic lithium (Li plating) can lead to dendrite growth, which is one of the most common failure mechanisms. If only one dendrite penetrates the separator and forms a conductive path between the two electrodes, a short circuit in the battery leads to its failure [2]. Despite the inherent rigidity of glass materials, previous studies demonstrated the successful application of glass-based separators in LIBs [3, 4]. To meet the requirements of modern battery production, a colloidal water-based system of glass particles and binder is used to manufacture flexible separators. Compared to state-of-the-art polymer-based separators, those flexible glass particle-based separators are superior in many of the required properties such as higher temperature resistance and dimensional stability up to 600 °C [3]. However, the size and morphology of the utilized particles have a significant impact on the manufacturing process, e.g. affect slurry processability and separator formation, and consequently on the electrochemical performance. The effects of these parameters have already been studied for spherical or arbitrarily-shaped particles [5, 6]. In the present work, platelet-shaped particles are utilized to manufacture glass-based separators. To further improve the operational safety of lithium-ion batteries, the benefit of platelet-shaped particles is compared to the use of arbitrarily-shaped particles. The use of these so-called glass flakes serves the purpose of forming an effective barrier against growing lithium dendrites by establishing a self-stabilizing structure. This barrier prevents or at least effectively delays penetration of the separator. For platelet-shaped particles, thickness and edge length of a particle differ significantly. Particles with a too high aspect ratio (edge length to thickness) block the Li+ diffusion pathway, affecting performance and stability of the final cell. Preliminary tests have shown that increasing the thickness of the glass flakes leads to a slight improvement of ionic conductivity, while increasing the edge length results in a strong reduction of ionic conductivity. However, separators containing particles with higher aspect ratio are expected to show increased piercing resistance. Thus, a trade-off between processability, electrochemical performance and safety barrier function against Li-dendrite growth and penetration is evaluated to understand the influence of particle morphology on the properties of separators using these particles. The microstructure of separators containing the different particle morphologies is examined using scanning electron microscopy (SEM) and correlated with the results of further characterization methods such as electrochemical impedance spectroscopy (EIS) and galvanostatic cycling. References [1] Liu, K., et al.: Materials for lithium-ion battery safety; Science Advances 4 (2018); eaas9820 [2] Wassiliadis, N., et al.: Review of fast charging strategies for lithium-ion battery systems and their applicability for battery electric vehicles; Journal of Energy Storage 44 (2021); 103306 [3] Schadeck, U., et al.: Flexible, Heat-Resistant, and Flame-Retardant Glass Fiber Nonwoven/Glass Platelet Composite Separator for Lithium-Ion Batteries; Energies 11 (2018) 4; 999–1013 [4] Schadeck, U., et al.: Porous and non-porous micrometer-sized glass platelets as separators for lithium-ion batteries; Journal of Membrane Science 550 (2018); 518–525 [5] Takemura, D., et al.: A powder particle size effect on ceramic powder based separator for lithium rechargeable battery; Journal of Power Sources 146 (2005); 779–783 [6] Kanhere, N., et al.: Electrode-coated alumina separators for lithium-ion batteries - effect of particle size and distribution of alumina powders; Powder Technology 353 (2019); 230–237

9 September 2026 in Batteries
Verified
Journal Article
Open access
PDF file
PRPhilipp Rank
Philipp Rank
SMSebastian Johann Müllner
Sebastian Johann Müllner
TGThorsten Gerdes
Thorsten Gerdes
CRChristina Roth
Christina Roth
Commercial polyolefin separators for lithium-ion batteries (LIBs) exhibit only inadequate wettability and thermal stability. In large-scale production, high electrolyte uptake and wetting are essential to enable rapid electrolyte filling during battery assembly to reduce costs. In addition, it is imperative to develop separators with enhanced thermal stability for improved performance and safety. The focus of this study is the structure–property–performance relationship of separator coatings. Platelet-shaped glass particles are utilized as inorganic coating material for polyethylene (PE) separators. Styrene–butadiene rubber (SBR) was selected as binder due to its high thermal stability. Hybrid separators are prepared using a colloidal coating technology employing a water-based slurry. As the excessive use of binder in the coating can block pores, precise control of the binder content was essential to maintain battery performance. The resulting separators with an optimized binder content of 1 wt.% in the coating demonstrate high porosity, instantaneous wetting with electrolyte, and a 25 K increase in onset temperature for shrinkage. The utilization of glass platelets with an aspect ratio of 10 as coating material provided the best balance among processability, coating homogeneity, thermal stability, ionic conductivity, and cycling performance under the investigated processing conditions.