Medical cannabis cultivation requires substantial energy for heating, lighting, and climate control. This study evaluates the economic feasibility of an innovative biomass-fired micro-CHP system in a greenhouse facility for medicinal cannabis cultivation. The system comprises an 80 kWth boiler retrofitted for biomass and a 7 kWel ORC engine and is assessed against a diesel-boiler Business-As-Usual (BAU) benchmark. Thermal load simulations for two growing periods (1 March–30 June and 1 September–30 December) estimate an annual heating demand of 91,065.20 kWhth. The micro-CHP system delivers 8195.87 kWhel per year, exceeding the greenhouse’s 7839.90 kWhel consumption. Over a 30-year lifespan at a 7% discount rate, Life Cycle Costing yields EUR 196,421.33 for micro-CHP versus EUR 229,468.46 for BAU, a 14.4% reduction. Under all-equity financing, the project achieves an NPV of EUR 59,591.88, IRR of 27.32%, and a DPBP of 12.1 years; with 70% debt financing, NPV rises to EUR 61,211.39 and DPBP shortens to 10.5 years. Levelized Cost of Energy (LCOE) and Heat (LCOH) are EUR 0.122 per kWhel and EUR 0.062 per kWhth, respectively. While the LCOE is below the Greek and EU non-household averages (EUR 0.1578 and EUR 0.1515 per kWhel), the LCOH exceeds the corresponding heat price benchmarks (EUR 0.0401 and EUR 0.0535 per kWhth). These results indicate that, in the modeled context, biomass-ORC cogeneration can be a financially attractive and lower-carbon option for medicinal cannabis greenhouse operations.
2 October 2023 in Thermal Science and Engineering Progress
The brine produced from desalination systems is a highly concentrated mixture, including cleansing chemicals from the water treatment processes that can possibly degrade ecosystems in discharge areas. Evaporation is a widely used method for the treatment of high salinity mixtures; however, it requires careful monitoring of the temperature and pressure in order to protect the equipment from the highly corrosive environment of the brine discharge. The proposed brine treatment system is based on the principle of vacuum evaporation with the use of a high-temperature heat pump, which is classified as “green technology”. In this study, a thermodynamic analysis of a vacuum evaporation system with a nominal freshwater production capacity of 160 L/h has been carried out, employing a numerical tool to model the flash evaporator and the heat pump. The analysis focuses on the parameters that present the most significant impact on the system’s efficiency and water production, such as the recirculation ratio, the set-point temperature of the heat pump and the pressure difference provided by the vacuum pump. The results show that, for the constant vacuum pressure difference, the water production increases with the increase in the set-point temperature and the recirculation ratio, but leads to the reduced COP of the heat pump and to an elevated specific energy consumption. Moreover, it is shown that an increased vacuum pressure difference leads to increased water production, but reduces the COP. Finally, the minimum specific energy consumption of 150 kWh/m3 of produced freshwater can be achieved for a set-point at 75 °C and vacuum of 0.21 bar, leading to a levelized cost of water about 11 €/m3.
The intensive livestock sector’s reliance on fossil fuels for space heating (SH) necessitates sustainable alternatives to reduce agricultural greenhouse gas (GHG) emissions. This study conducts a cradle-to-grave Life Cycle Assessment (LCA) to evaluate a Partially Evaporating Organic Rankine Cycle (PEORC) micro-combined heat and power (micro-CHP) system for swine nursery facilities. A solar–biomass hybrid (PS1) and a standalone biomass-driven architecture (PS2) are compared against conventional diesel (REF1) and biomass (REF2) boilers across Greece, Denmark, and Poland. Across the three locations, PS1 reduced Climate Change impacts by 89.6–108.3% relative to REF1 and 23.2–161.1% relative to REF2, while PS2 achieved reductions of 93.0–112.3% and 48.2–190.7%, respectively; reductions greater than 100% reflect net-negative modeled impacts driven by grid electricity displacement under the substitution assumptions. PS2 was environmentally superior in most impact categories across all locations. Omitting the solar field avoided substantial embodied burdens in resource depletion and ecotoxicity and reduced Climate Change impacts by up to 116.0% relative to PS1. Transitioning from conventional R134a to the low-GWP (Global Warming Potential) working fluid (WF) R1233zd(E) substantially mitigated severe Climate Change and Ozone Depletion Potential (ODP) risks associated with simulated operational leakages, reducing the WF’s Single Environmental Score (SES) by approximately 90%. Despite the eroding effect in substitution credits caused by the dynamic grid decarbonization at EU level, bio-mass-driven micro-CHP systems present a highly effective decentralized de-carbonization strategy for agricultural heating.