In order to eliminate the influences of surface stripped iron oxide scale, dust and emissivity on temperature measurement for casting billets, a novel surface temperature measurement system based on multisensory information fusion technology is described in this paper. The system consists of a visible imaging charge coupled device (CCD) camera with high resolution, a colorimetric thermometer, an optical filter and associated software processing units. It makes use of the high resolution characteristic of CCD and the distribution character of surface temperature field of casting billets to reduce the temperature fluctuation aroused by the surface stripped iron oxide scale, and the spot temperature measured by the colorimetric thermometer is fused into the temperature field measured by the CCD camera to overcome shortcomings of merely using the CCD camera in temperature measurement, such as being susceptible to dust at wide field, and not capable of obtaining true temperature because of inconclusive emissivity for different grades of steel. In order to validate the effectiveness of the method proposed in this paper, temperatures of different grades of steel are measured by this system, and temperature is also measured by this system during the changes of the casting speed and the volume of the cooling water. All these measurement results show the maximum fluctuation of the temperature measured by this system was ±5 K and the surface temperature of casting billets measured by this system can reflect changes of processing parameters in the continuous casting production line in real time. Thus, the temperature measured by this system can be used as a feedback control parameter to improve the control for dynamically adjusting water distribution and casting speed in practical application.
27 November 2018 in IEEE Transactions on Instrumentation and Measurement
High-temperature medium and time-varying covering flux lead to the difficulty of molten steel level measurement. For the measurement, in our previous work, a novel principle by using temperature gradient was proposed by us, and a refractory sensor was inserted into the metallurgical container to sense the temperature gradients of the flux and the molten steel. However, sometimes liquid adhesive flux on the sensor surface disables the extraction of true temperature gradients. To fix this problem, two new models, the adhesion thickness model and the adhesion flowability model, which are inspired by the adhesion mechanism of the flux, are proposed to detect the steel-flux interface. A unified approach, sequential clustering of the shapes of the pixel gray-time curves, is introduced to conduct the detection. On this basis, the thermal image sequence with 4-D spacetime information of the sensor is used for clustering. First, gray values of each pixel in the sequence are sorted in the time dimension, and grouping of the pixels in space dimension is done. Then, the region of interest is extracted from the image sequence to remove the invalid pixels, and sequential clustering is conducted with each group. Finally, the confidence of the clustering results is measured and the clustering results with the confidence higher than the threshold are retained to detect the steel-flux interface. By utilizing the two new models, the standard deviation of the measurement errors reduces from 4.8 to 3.7 mm.
In this paper, we present a water mist dehazing network to improve the accuracy of radiation temperature measurements of the billet surface in the secondary cooling zone of continuous casting. First, we develop a billet radiation attenuation model that accounts for the wavelength-dependent attenuation coefficient of water mist in the secondary cooling zone. Using this model and the corresponding dataset, the water mist transmittance is calculated. Furthermore, the water mist dehazing network—which is distinct from conventional dehazing networks designed for natural environments—comprises three key components: water mist feature extraction based on a combined Unet and Transformer structure; fusion of prior water mist transmittance data using an attention mechanism; and composite transmittance estimation via a multi-path dense network. The experimental results demonstrate that the proposed network effectively reduces water mist’s interference with billet surface temperature measurements in both the spatial and temporal dimensions. Compared with the standalone Unet and Unet + Transformer network architectures, the proposed network achieves a significantly improved dehazing performance, thus verifying its practical value and reliability for billet surface temperature measurement tasks.