Karsten Oehlert

Dr. Karsten Oehlert


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 May 2026 in Wind
Verified
Journal Article
Open access
PDF file
KHKonrad Maximilian Hartung
Konrad Maximilian Hartung
MSMarvin Stumpe
Marvin Stumpe
KOKarsten Oehlert
Karsten Oehlert
This study investigates whether aerodynamic interaction effects in an interlocked (negative-gap) counter-rotating dual Savonius rotor configuration can improve the efficiency of drag-based vertical-axis wind turbines in urban wind conditions. Two-dimensional Computational Fluid Dynamics (CFD) simulations were performed in ANSYS Fluent 2025 R2 using both steady and unsteady RANS approaches, including dynamic meshing to enable collision-free rotation in the interlocked overlap region. The numerical setup was first validated for a single two-bucket reference rotor against published experimental data of torque and power coefficients and subsequently applied to dual-rotor configurations with negative gap distances. The results show that the dual-rotor arrangement redistributes torque production over the azimuth angle and yields a smoother and consistently positive mean static torque coefficient, indicating improved self-starting behavior compared to the single rotor. Under transient operation, the dual-rotor configuration yields higher power coefficient values across the entire investigated tip-speed ratio range. The highest performance gain is observed at a tip-speed ratio of λ≈1.0, where the peak power coefficient increases from cp≈0.25 (single-rotor) to cp≈0.32 (dual-rotor), corresponding to an improvement of the power coefficient of about Δcp/cp0≈28%.

KHKonrad Maximilian Hartung
Konrad Maximilian Hartung
SMStefan Mauersberger
Stefan Mauersberger
ULUdo Loeschner
Udo Loeschner
KOKarsten Oehlert
Karsten Oehlert
The reduction in aerodynamic drag remains a crucial pathway for enhancing turbomachinery efficiency. Riblet structures are a well-established passive technique to reduce viscous drag, but their application has been constrained by the challenge of adapting size and orientation to match the local flow conditions. This study presents a novel laser-based fabrication process developed at the Laserinstitut Hochschule Mittweida, which enables the production of continuously adapted riblets on complex curved surfaces. Numerical simulations were employed to design riblet patterns for the NACA0012 airfoil at zero angle of attack, followed by laser manufacturing and high-resolution surface characterization. Aerodynamic performance was evaluated through wake surveys in a Göttingen-type wind tunnel at the Jade University of Applied Sciences. The results validate the numerical design approach and show that tailored riblet structures provide a notable improvement in drag reduction compared to constant geometries, with relative gains of about 8% for the one-sided and 16% for the two-sided application. These findings underline the potential of advanced laser-based manufacturing processing to enable riblet integration in turbomachinery under industrially relevant conditions.