Substitution of pulverised coal injection (PCI) by solid biocarbon fuel has the potential to achieve substantial reduction in GHG emissions associated with blast furnace ironmaking. A systematic evaluation was conducted on the performance of solid biocarbons produced from a single raw biomass source using different pyrolysis technologies. A techno-economic model was developed to evaluate the value-in-use (VIU) of the prepared solid biocarbon in blast furnace ironmaking. The VIU of solid biocarbon is strongly influent by its O/C (oxygen to carbon) mass ratio which is determined by the pyrolysis technology and conditions employed. It also dictates the cost of raw materials required to support the blast furnace ironmaking process and the potential GHG emissions achievable. In order to balance all factors that may affect the VIU of solid biocarbon, close collaboration between steelmakers and solid biocarbon producers is critical for producing suitable solid biocarbon fuel to replace PCI.
Electric arc furnaces (EAFs) are used for steel production, particularly when recycling scrap material. In EAFs, carbonaceous material is charged with other raw materials or injected into molten slag to generate foam on top of liquid metal to increase energy efficiency. However, the consumption of fossil carbon leads to greenhouse gas emissions (GHGs). To reduce net GHG emissions from EAF steelmaking, the substitution of fossil carbon with sustainable biogenic carbon can be applied. This study explores the possibility of the substitution of fossil material with biogenic material produced by different pyrolysis methods and from various raw materials in EAF steelmaking processes. Experimental work was performed to study the effect of biogenic material utilization on steel and slag composition using an induction melting furnace with 50 kg of steel capacity. The interaction of biogenic material derived from different raw materials and pyrolysis processes with molten synthetic slag was also investigated using a tensiometer. Relative to other biogenic materials tested, a composite produced with densified softwood had higher intensity interfacial reactions with slag, which may be attributed to the rougher surface morphology of the densified biogenic material.