Henning Buhl

Dr. Henning Buhl

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 November 2025 in Actuators
Verified
Journal Article
Open access
PDF file
ZCZijian Chen
Zijian Chen
JTJens Twiefel
Jens Twiefel
CDChenglong Ding
Chenglong Ding
HBHenning Buhl
Henning Buhl
BDBerend Denkena
Berend Denkena
Jörg WallaschekJörg Wallaschek
Jörg Wallaschek
Microelectromechanical systems (MEMSs) are increasingly used for both industrial and consumer applications. To improve the accuracy and efficiency of MEMS fabrication and to overcome the limitations of conventional contactless positioning systems, this study introduces a novel positioning concept that combines ultrasonic levitation with electromagnetic actuation. Squeeze-film effects generated by high-frequency ultrasonic transducers enable levitation, while fast-response reluctance forces from electromagnets govern the positioning dynamics without requiring bulky mounting frames. The focus of this paper is on proposing a novel double-acting ultrasonic transducer with a Gaussian profile horn, ensuring an approximately uniform vibration distribution and increased levitation force. The double-acting design enables levitation on both surfaces, simplifying the mounting and thermal compensation of the transducer’s expansion while reducing interactions among transducers. A model-based control strategy ensures resonant operation and constant vibration amplitude. Experiments demonstrate levitation forces up to 343 N, with a total levitation height of 25 µm, resulting from two levitation air gaps. Comprehensive performance characterization validates the feasibility of this transducer design for integration into the proposed positioning system.

25 September 2025 in CIRP Journal of Manufacturing Science and Technology
Verified
Journal Article
Open access
BDBerend Denkena
Berend Denkena
BBBenjamin Bergmann
Benjamin Bergmann
HBHenning Buhl
Henning Buhl
MHMiriam Handrup
Miriam Handrup

9 October 2026 in Data in Brief
Verified
Journal Article
Open access
BDBerend Denkena
Berend Denkena
BBBenjamin Bergmann
Benjamin Bergmann
HBHenning Buhl
Henning Buhl
DKDennis Kowalke
Dennis Kowalke
MHMiriam Handrup
Miriam Handrup
Quality control in machining is essential for consistent workpiece quality. Predictive quality methods that predict the workpiece quality based on monitored signals are used instead of real measuring devices in order to reduce non-productive times and save costs by detecting scraps already during the process. The methods often apply machine learning models since they can model complex relationships and can handle a wide range of signal sources. While machine learning models require a lot of training data, only few datasets are publicly available that include process signals from various sensors. The presented dataset provides multivariate time series data of 453 longitudinal turning processes with varying feed, cutting speed, depth of cut and workpiece material. Additionally, the resulting surface roughness and diameter deviation are provided for each cut. All cuts were carried out using new cutting tools. To minimize measuring errors, the surface roughness and diameter deviation were measured on-machine using machine integrated touch probes. This dataset supports research into predictive quality using machine learning models.

19 November 2025 in Actuators
Verified
Journal Article
Open access
PDF file
BDBerend Denkena
Berend Denkena
Jörg WallaschekJörg Wallaschek
Jörg Wallaschek
HBHenning Buhl
Henning Buhl
JTJens Twiefel
Jens Twiefel
CDChenglong Ding
Chenglong Ding
ZCZijian Chen
Zijian Chen
In micro-production technology (MPT), the demand for ultra-precise machine tools has been steadily increasing. Conventional guideway systems, such as hydrostatic or aerostatic bearings, often face limitations in terms of compactness, media supply, and susceptibility to external disturbances, which restrict their applicability in next-generation precision manufacturing. In order to address these challenges, this paper presents a novel media-free, contactless, and active three-degree-of-freedom (DOF) planar positioning (guiding) system that integrates ultrasonic actuators with electromagnetic actuators. The hybrid concept combines the high load capacity and self-stabilization of double-acting ultrasonic actuators and pronounced controllability of the electromagnetic actuators. A prototype system was developed and experimentally validated. Ultrasonic actuators successfully established a stable levitation state, while electromagnetic actuators provided fine adjustment of the levitation height in the micrometer range. Load tests demonstrated that the system maintained stable levitation under an external load of 30 N. These results confirm the feasibility of the proposed approach for robust and precise positioning. The developed hybrid system therefore represents the potential for next-generation precise manufacturing machines in MPT, offering high accuracy and robustness against external disturbances.

Verified
Journal Article
Open access
PDF file
BDBerend Denkena
Berend Denkena
HBHenning Buhl
Henning Buhl
Bengt Torben Gösta RademacherBengt Torben Gösta Rademacher
Bengt Torben Gösta Rademacher
Rising energy costs and strict CO2 traceability regulations create demand for monitoring energy and CO2 emissions in manufacturing. This paper presents a framework for modelling component-wise energy models with deployable accuracy. In many factories, power metres log data at a sampling rate of 1–2 Hz, so short start-up peaks of components are underestimated. Manufacturers want to exploit this information to support operational decisions, such as peak shaving and optimising energy contract costs. To enable data-driven decisions with limited measurement infrastructure, energy models must extrapolate component behaviour from sparse data. The framework is based on power measurements in accordance with ISO 14955-3, ensuring that the load characteristics required for subsequent modelling are known. The measurements are then segmented, and regressions are fitted for each segment. As a case study considering the mist extractors of two different machine tools, the proposed segmentation achieved determination coefficients (R2) of up to 0.94 in the complex ramp-up phase. The resulting models are compact, interpretable, and suited for energy monitoring on edge devices. The contribution is a reproducible framework for delivering peak-aware, component-level energy models from low-frequency industrial power metre data.

8 November 2025 in Sensors
Verified
Journal Article
Open access
PDF file
BDBerend Denkena
Berend Denkena
HBHenning Buhl
Henning Buhl
JZJingcai Zhang
Jingcai Zhang
Magnetic guides facilitate frictionless movement in machine tools, allowing for high position accuracy and high feed rate dynamics. However, achieving a stable state while subjected to machining forces requires a high magnetic force, which will cause deformation of the surrounding construction. This deformation leads to the contraction of the air gap between the slide and guideways. The air gap has a quadratic effect on the magnetic force, which poses a challenge to the control system. In addition, the effect of elastic deformation on magnetic guides is difficult to detect in real time due to the interference of magnetic fields in sensors and installation space constraints. In order to quantitatively analyze the effects of magnetic guide deformations, particularly of electrical steels, a combined approach of numerical analysis and experimental evaluation was conducted. As a result, the deformation of electrical steels, which is typically overlooked in conventional applications, is identified and analyzed. Force stabilization is achieved through adaptive set point correction and current adjustment, ensuring reliable and accurate operation of the magnetic guide system.