Jingcai Zhang

Mr. Jingcai Zhang

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 June 2023
Verified
Conference Paper
Closed access
BDBerend Denkena
Berend Denkena
HKHeinrich Klemme
Heinrich Klemme
JZJingcai Zhang
Jingcai Zhang
Active magnetic bearings can potentially be used for linear guidance of machine components. However, their performance is limited by the system's latency. Reducing the latency leads to an improved dynamic stiffness of the actuator, and thus to a broader range of applications. Therefore, this paper introduces a study that aims to improve a novel linear electromagnetic actuator used in optics manufacturing. To analyze the latency, a testbed consisting of an electromagnet, a rapid DC current controller, and a real-time prototyping system is built. The latency of individual components is determined, and pertinent factors are identified. By integrating position and current controls, the latency is reduced by more than 75%. Thereby the dynamic stiffness of the magnets is increased.

8 November 2025 in Sensors
Verified
Journal Article
Open access
PDF file
BDBerend Denkena
Berend Denkena
HBHenning Buhl
Henning Buhl
JZJingcai Zhang
Jingcai Zhang
Magnetic guides facilitate frictionless movement in machine tools, allowing for high position accuracy and high feed rate dynamics. However, achieving a stable state while subjected to machining forces requires a high magnetic force, which will cause deformation of the surrounding construction. This deformation leads to the contraction of the air gap between the slide and guideways. The air gap has a quadratic effect on the magnetic force, which poses a challenge to the control system. In addition, the effect of elastic deformation on magnetic guides is difficult to detect in real time due to the interference of magnetic fields in sensors and installation space constraints. In order to quantitatively analyze the effects of magnetic guide deformations, particularly of electrical steels, a combined approach of numerical analysis and experimental evaluation was conducted. As a result, the deformation of electrical steels, which is typically overlooked in conventional applications, is identified and analyzed. Force stabilization is achieved through adaptive set point correction and current adjustment, ensuring reliable and accurate operation of the magnetic guide system.

1 February 2025 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
BDBerend Denkena
Berend Denkena
HKHeinrich Klemme
Heinrich Klemme
JZJingcai Zhang
Jingcai Zhang
Optical waveguides can be manufactured using transfer processes. Therefore, the substrate needs to be transported and precisely aligned between different process steps. To achieve high productivity, a high dynamic transport system is necessary. However, for conventional transport systems, the dynamic positioning accuracy is limited due to friction of the contact-based guides. Thus, a friction-free transport system has the potential to achieve a higher dynamic positioning accuracy. In this paper a novel friction-free transport system with magnetic guide is presented. Its impressive load capacity and high dynamics have been verified through experiments. Based on the experimental data, the transport system is capable of providing loads of up to approximately 2000 N to meet printing requirements and a bandwidth of 75.0 Hz was achieved, which is 125% higher than the contact-based device.