The determination of the elemental composition of minerals at mining enterprises is important at all stages of mineral processing. An evaluation of metrological characteristics achieved through the online analysis of lump, ore, charge feed, cake and slag materials on a conveyor belt is presented. Each implementation of the online XRF analysis at mining enterprises was preceded by laboratory studies, the development of measurement methods and the calibration of a specific XRF analyzer using standard reference samples for a specific concentration range of the monitored elements. In this work, typical application areas for monitoring the concentration of elements in rocks on conveyor belts are presented, as well as those solutions that made it possible to achieve the required measurement accuracy with an X-ray fluorescence analyzer in an online mode.
Determination of the elemental composition of minerals and their derivatives at mining enterprises is important at all stages of minerals processing. This paper is devoted to the results of development and application of an online X-ray fluorescence (XRF) analysis method for monitoring mineral elements on a conveyor belt of mining enterprises. Evaluation of metrological characteristics achieved in the online analysis of lump, ore, charge feed, cake and slag materials on conveyor belt is presented. Each implementation of the online XRF analysis at mining enterprises was preceded by laboratory studies, development of measurement methods, calibration of a specific XRF analyzer using standard reference samples for a specific concentration range of the monitored elements. Typical areas of application for monitoring the concentration of elements in rocks on conveyor belts of mining enterprises and those solutions that made it possible to achieve the required measurement accuracy of an X-ray fluorescence analyzer in online mode are presented.
Determination of the elemental composition of minerals and their derivatives at mining enterprises is important at all stages of materials processing. This paper is devoted to the results of development and application of an online XRF analysis method for monitoring mineral elements on a conveyor of mining enterprises. The paper gives an overview of mining applications in which we have successfully implemented the online analysis based on the CON-X industrial XRF analyzer in lump, ore, charge feed, cake and slag materials on conveyor belt. An evaluation of metrological characteristics achieved in these applications is presented.
An X-ray fluorescence online analyzer was applied to the analysis of samples of known composition and concentration containing rare earth elements (REEs) and heavy metals (HMs), which were specially prepared by the authors (working samples). Reference samples were used for Th and U. The statistical parameters (detection limit, accuracy, and sensitivity) of the measurements of the spectra were calculated and a thorough assessment of the results was carried out. For large-volume samples, detection limits of 20–100 ppm for REEs and 10–140 ppm for HMs were achieved within 600 s. For thin-layer samples and similar geometries, detection limits for light and medium REEs improved to 3–20 ppm. The methodological possibilities for quantitative analysis of the REEs and HMs were examined and a rather simple approach with an easy implementation was developed. The method was tested in automatic measurements using concentrations in the range of 1000–4000 ppm, as a simulation of real-life measurements, and to determine the stability of the analyzer and the consistency of the results obtained. The results show that the online XRF analyzer can be applied for reliable detection and quantification of REEs and HMs at the ppm level. With these results, we are closer to obtaining results under conditions representative of those on real-world mining conveyor belts.