Hanifah Widiastuti

Dr. Hanifah Widiastuti


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 December 2019 in Jurnal Rekayasa Proses
Verified
Journal Article
Open access
PDF file
HWHanifah Widiastuti
Hanifah Widiastuti
MPMeiti Pratiwi
Meiti Pratiwi
GNGodlief F. Neonufa
Godlief F. Neonufa
TSTatang Hernas Soerawidjaja
Tatang Hernas Soerawidjaja
TPTirto Prakoso
Tirto Prakoso
Nyamplung (Callophylum inophyllum) contains oil around 40-73% in its seed. It has recently gained recognition as a potential source for biofuel production. The oil recovery process from renewable sources such as nyamplung is widely carried out by using chemical extraction with solvents. Nevertheless, this method is considered costly and there are safety issues as well as environmental concerns related to the solvents used. Therefore, mechanical extraction has emerged as an alternative method. In this study, the nyamplung oil recovered by mechanical extraction via hydraulic press and chemical extraction utilizing Soxhlet extraction was compared. Soxhlet extraction was carried out by using n-hexane as a solvent with a temperature of 70 oC for 5 hours. Before the extraction process, the kernel was initially pretreated to reduce the particle sizes and the water content. The results show that the oil yield recovered using the hydraulic press is 58%, which is comparable with the value obtained from Soxhlet extraction (65%). The oil characteristics were also compared, and the profiling shows no significant difference in the properties (saponification value, acid value, and iodine value) of oils recovered using both methods. The composition of fatty acids was also analyzed for utilization as a biofuel feedstock. Higher content of oleic acid was observed in oil resulted from chemical extraction while mechanical extraction yielded oil with higher palmitic acid content.A B S T R A KNyamplung (Callophylum inophyllum) mengandung minyak sebesar 40-73% dalam bijinya dan belakangan ini diakui sebagai sumber potensial untuk pembuatan biofuel. Proses perolehan minyak nabati dari biji nyamplung pada umumnya dilakukan menggunakan ekstraksi kimia dengan pelarut. Akan tetapi, metode ini cenderung berbiaya tinggi serta memiliki isu berkaitan dengan keselamatan proses dan dampak lingkungan berkaitan dengan penggunaan pelarut. Oleh karena itu, metode ekstraksi mekanis banyak dikembangkan sebagai alternatif metode ekstraksi minyak. Dalam penelitian ini, hasil perolehan minyak nyamplung melalui penekanan hidrolik dibandingkan dengan hasil dari ekstraksi Soxhlet. Ekstraksi Soxhlet dilakukan dengan pelarut n-heksana pada suhu 70 oC selama 5 jam. Sebelum proses ekstraksi, biji nyamplung mengalami perlakuan awal terlebih dahulu dengan cara digiling untuk mengurangi ukuran biji dan dipanaskan untuk mengurangi kadar air. Hasil yang diperoleh menunjukkan bahwa yield minyak dari ektraksi mekanik sebesar 58% sementara yield dari ekstraksi Soxhlet adalah 65%. Karakteristik minyak yang dihasilkan melalui kedua metode ini tidak menunjukkan perbedaan yang signifikan dalam hal nilai saponifikasi, nilai asam, dan nilai iodine. Analisis komposisi asam lemak dari kedua minyak yang dihasilkan menunjukkan bahwa minyak yang diperoleh dari ekstraksi kimia mengandung asam oleat dengan persentase yang lebih tinggi sementara minyak dari hasil ekstraksi mekanik memiliki persentase asam palmitat yang lebih tinggi.

1 January 2023 in AIP Conference Proceedings
Verified
Conference Paper
Open access
PDF file
BBBudi Baharudin
Budi Baharudin
HWHanifah Widiastuti
Hanifah Widiastuti
NLNur Fitria Pujo Loksonowati
Nur Fitria Pujo Loksonowati
PPPanji A. Prajasutra
Panji A. Prajasutra
AEAthifah Az-Zahra Effendi
Athifah Az-Zahra Effendi
In the oil and gas industry, the moving of materials and equipment is often carried out using forklift. Thus, a safe and reliable forklift is required to guarantee the moving processes to proceed safely and smoothly. To this end, one of the means to ensure that the lifting equipment could perform well is by conducting preventive maintenance. Preventive maintenance, which is another form of controlling risks related to equipment, consists of several methods such as: lubrication, cleaning and inspection. The inspection is a comprehensive preventive maintenance during which not the evaluation is conducted not only on the function of equipment, but also on the safety of the operators who utilize the equipment and the surrounding environment where the equipment is operated. In this study, the preventive maintenance was performed on forklifts by following the Lifting and Transporting Instruments Inspection based on the Minister of Manpower Regulation No. 8 2020 on Occupational Safety and Health for Lifting and Transporting Instruments. The methods carried out were visual inspection, technical measurement, non-destructive testing, function testing and load lifting testing. These procedures resulting in several recommendations, namely the necessity to repair the safety equipment section (the horn), the urgent replacement of brake lights and the required action on the leak in hydraulic seals.

28 May 2026 in Macromol
Verified
Journal Article
Open access
PDF file
HWHanifah Widiastuti
Hanifah Widiastuti
MAMuhammad Hasan Albana
Muhammad Hasan Albana
Adi Syahputra PurbaAdi Syahputra Purba
Adi Syahputra Purba
NPNaufal Abdurrahman Prasetyo
Naufal Abdurrahman Prasetyo
The linear economic model continues to drive multidimensional environmental problems, as it generates large volumes of plastic waste, as well as agricultural by-products, such as coconut husks. On the other hand, the maritime industry still relies on conventional materials such as wood, steel, and fibre-reinforced plastics, which have several usage challenges, including corrosion, toxicity, and difficulties associated with end-of-life management. These issues point to the need for more sustainable material options. This review examines the potential of combining coconut fibre (coir) with recycled plastics to produce a functional material for use in the maritime sector. The material is designed to add value to waste streams by providing a practical approach to reducing dependence on conventional and less sustainable resources. The review discusses fibre treatments (alkali, silane, acetylation) and fabrication methods (compression moulding, extrusion) and evaluates their impact on mechanical performance and durability. The studies show that coir–plastic composites possess highly tuneable mechanical properties. Tensile strengths are reported to range from approximately 2.4 MPa for natural resin matrices to 78 MPa for polyester hybrids, while the flexural modulus can be increased by up to 99% compared to the neat polymer blend. Fibre treatments (e.g., alkali) and fabrication methods are crucial, as they have been shown to improve tensile and flexural strength by over 40% and impact strength by 150%. However, the composites produced still show vulnerability to water absorption, UV radiation, and biofouling, which could limit their application in marine environments. To this end, several issues require further study, including long-term field validation, enhanced understanding of material fatigue, and scalable manufacturing.

1 January 2023 in AIP Conference Proceedings
Verified
Conference Paper
Open access
PDF file
Muhammad Zainuddin LubisMuhammad Zainuddin Lubis
Muhammad Zainuddin Lubis
GSGregorius Harry Saktian Sinaga
Gregorius Harry Saktian Sinaga
WAWenang Anurogo
Wenang Anurogo
MGMuhammad Ghazali
Muhammad Ghazali
HWHanifah Widiastuti
Hanifah Widiastuti
MKMira Chandra Kirana
Mira Chandra Kirana
Batam Island has abundant natural resources in the sea area. This is due to the fact that Batam Island is surrounded by the ocean. However, the potential of this great natural resource has not been fully exploited by people on Batam Island, especially by the fishermen. This is due to the lack of information regarding the distribution value of chlorophyll-a which is required to determine the potential location of various biodiversity in piayu waters. The aim of this study was therefore to determine the distribution of chlorophyll-a in Piayu waters. The data processing method used was the extraction of Terra Modis image data using Ocean Data View (ODV) software. From this research, a map of the distribution of chlorophyll-a in Piayu waters was produced. The results showed that the highest distribution of chlorophyll-a occurred in May 2019 with a chlorophyll value of 2,462 mg/m3. The lowest distribution of chlorophyll-a in this study was in December 2018 with a value of 1,612 mg/m3. The content of chlorophyll-a is more abundant in the surface layer near the mainland waters of Piayu, Batam, while the closer it is to the sea, the lower the chlorophyll-a content.

30 November 2025 in Device
Verified
Journal Article
Open access
VPVeryawan Nanda Perkasa
Veryawan Nanda Perkasa
IWIta Wijayanti
Ita Wijayanti
HWHanifah Widiastuti
Hanifah Widiastuti
MSMeschac Timothee Silalahi
Meschac Timothee Silalahi
Optimasi geometri lambung kapal merupakan strategi krusial untuk meningkatkan efisiensi hidrodinamis dan mengurangi konsumsi bahan bakar dalam industri maritim modern. Penelitian ini menginvestigasi pengaruh variasi sudut masuk haluan (entrance angle) terhadap karakteristik hambatan kapal displacement melalui simulasi numerik sistematis menggunakan Maxsurf Resistance dengan metode slenderbody. Empat model kapal dengan sudut masuk 15°, 20°, 25°, dan 30° dianalisis secara komprehensif pada rentang kecepatan operasional 15-25 knot (bilangan Froude 0,45-0,75), mencakup 44 kondisi simulasi. Model kapal memiliki panjang keseluruhan 30 meter, lebar 8 meter, sarat 2,5 meter, displacement 319 ton, dan koefisien blok 0,52, merepresentasikan kapal patroli dan kapal penyeberangan cepat yang beroperasi di perairan Indonesia. Hasil penelitian menunjukkan bahwa sudut masuk haluan memiliki pengaruh sangat signifikan terhadap total hambatan, dengan magnitude pengaruh yang meningkat pada kecepatan tinggi. Model dengan sudut masuk 15° menghasilkan hambatan terendah secara konsisten di seluruh rentang kecepatan yang diuji. Pada kecepatan 20 knot, model 15° menghasilkan hambatan 193,7 kN dibandingkan 285,0 kN untuk model 30°, menunjukkan perbedaan substansial sebesar 47,1% atau 91,3 kN. Analisis mekanisme fisika mengungkapkan bahwa sudut masuk yang lebih tajam menghasilkan karakteristik pembentukan gelombang yang lebih efisien dengan amplitudo bow wave lebih rendah, sistem gelombang yang lebih terorganisir, dan interferensi gelombang yang menguntungkan. Sensitivitas hambatan terhadap sudut masuk meningkat pada kecepatan tinggi (Fn > 0,60) dimana hambatan gelombang menjadi komponen dominan. Untuk kapal cepat dengan kecepatan operasional 20-25 knot, sudut masuk 15-20° direkomendasikan untuk minimisasi hambatan dan optimisasi efisiensi bahan bakar, dengan potensi penghematan operasional jutaan dollar selama lifecycle kapal