Xiaoyong Xu

Mr. Xiaoyong Xu


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 November 2024 in Photonics
Verified
Journal Article
Open access
PDF file
MYMingye Yang
Mingye Yang
JFJiacheng Feng
Jiacheng Feng
XXXiaoyong Xu
Xiaoyong Xu
HWHanshuo Wu
Hanshuo Wu
ZPZhiyong Pan
Zhiyong Pan
Xiaolin WangXiaolin Wang
Xiaolin Wang
Utilizing long-wavelength laser diodes (LDs) for pumping to achieve high-power fiber laser output is an effective method for attaining high quantum efficiency and excellent thermal management. In this work, we report on a Master Oscillator Power Amplifier (MOPA)-structured long-tapered Yb3+-doped fiber laser directly pumped by long-wavelength laser diodes. By shifting the center wavelength of the pump source to 1010 nm, the heat generation within the fiber laser is effectively controlled, thereby increasing the transverse mode instability (TMI) threshold. Additionally, the use of a long-tapered fiber enlarges the mode area and suppresses stimulated Raman scattering (SRS) effects that typically arise from increased fiber length. As a result, an output of 6030 W is achieved with an optical-to-optical (O–O) efficiency of 83.7%, a SRS suppression ratio exceeding 50 dB, and no occurrence of dynamic TMI. This approach provides a valuable reference for optimizing long-wavelength pumping to suppress nonlinear effects and also holds potential for wide-temperature operational applications.

15 October 2025 in Photonics
Verified
Journal Article
Open access
PDF file
YLYang Liu
Yang Liu
XXXiaoyong Xu
Xiaoyong Xu
MCMengfan Cui
Mengfan Cui
WLWei Li
Wei Li
CWChongwei Wang
Chongwei Wang
PMPengfei Ma
Pengfei Ma
A high-power narrow-linewidth fiber laser with single-mode beam quality is experimentally demonstrated. By employing a cascaded phase modulation strategy, the stimulated Brillouin scattering (SBS) threshold of the laser is effectively increased from 973 W to 1970 W. High-order modes are well suppressed during power scaling, benefiting from the significant bending loss of a low numerical aperture (NA) ytterbium-doped fiber. A maximum output power of 1970 W is achieved, with a linewidth of 3.2 GHz and a beam quality factor M2 of 1.14. To the best of our knowledge, this represents the highest reported output power for narrow-linewidth fiber lasers (linewidth < 10 GHz) operating at wavelengths below 1040 nm.