The impact of Photovoltaic (PV) installations on the fire safety of buildings must be considered in all building projects where such energy systems are established. The holistic fire safety of the building largely depends on how the fire safety of the PV installation is considered by the different actors during the design and construction process. Research has therefore been undertaken to study how performance-based regulations in combination with the lack of national guidelines affect the overall fire safety considerations for PV installations in Norway. Four factors were found to govern to which extent PV installations are emphasised in the fire safety design phase: (1) whether the building was first of its kind as a pioneering building, (2) whether the building was built before or after the publication of the 2018 revision of the norm NEK 400, (3) The level of knowledge and experience of the fire safety consultant, which in turn affects the use of performance-based engineering tools and the level of detailing in the design and construction phases, and (4) The degree of integration in the building. The main goal of the study is to give an insight and a contribution to the development of in-depth knowledge on how fire safety design for PV installations on buildings is handled in Norway, which may also be relevant to other countries with similar performance-based regulations.

This chapter summarises the content and intention of the book. It introduces the Building-Integrated Photovoltaic (BIPV) technology and the definition of BIPV modules and explains the scope of this book. Then, it gives a summary of each chapter. <!----> <!----> <!----> <!---->

This study investigates the fire behaviour of building-integrated photovoltaic (PV) claddings, focusing on the progression from glass failure to ignition under different cavity conditions. Experimental tests were conducted on two common PV cladding types: bifacial dual-glass (GG) and monofacial glass–plastic (GP) modules. Results revealed that GP modules exhibited faster burning and higher peak heat release rates (HRR), reaching up to 600 kW, while GG modules burned more slowly with peak HRR between 50 and 100 kW. Cavity conditions, including depth, ventilation, and operational energization, were found to be vital in determining glass breakage, occurring between 400 and 550 °C, and cavity ignition and subsequent flame spread. The relationship between cavity fire dynamics and glass breakage suggests the importance of system design, particularly regarding cavity ventilation and flame barriers, for mitigating upward fire propagation. These results establish a basis for advancing numerical fire models through integration of critical parameters such as material properties, glass breakage, cavity ignition, and cavity configuration. This approach supports comprehensive real-scale analysis to guide the development of effective design recommendations, ultimately improving fire safety in PV-integrated construction.