The crystal structure of GaAs nanowhiskers grown by molecular-beam epitaxy on Si(111) and Si(100) substrates is investigated using reflection high-energy electron diffraction (RHEED). It is revealed that, in both cases, the electron diffraction images contain a combination (superposition) of systems of reflections characteristic of the hexagonal (wurtzite and/or 4H polytype) and cubic (sphalerite) phases of the GaAs compound. The growth on the Si(111) substrates leads to the formation of nanowhiskers with hexagonal (wurtzite and/or 4H polytype) and cubic (sphalerite) structures with one and two orientations, respectively. In the case of the Si(100) substrates, the grown array contains GaAs nanowhiskers that have a cubic structure with five different orientations and a hexagonal structure with eight orientations in the (110) planes of the substrate. The formation of the two-phase crystal structure in nanowhiskers is explained by the wurtzite—sphalerite phase transitions and/or twinning of crystallites.
The anomalous piezoelectric effect in GaAs nanowires was detected (the piezoelectric module d33 ≈ 26 pC/N). This result can be explained by the dominant content of the phase with the wurtzite-type crystal structure in GaAs nanowires and an increased pressing force on the contact layer.
An experimental study aimed at developing the method of the spontaneous synthesis of InGaN/GaN nanowires formed as radial heterostructures by molecular-beam epitaxy is reported. By means of electron microscopy, it is shown that a wedge-shaped crack can be formed at an In content x = 0.4 and 0.04 in the core and shell, respectively. On the basis of the model of internal structural stresses, a formula is proposed to estimate the critical dimensions and composition for the formation of cracks in nanowires. Comparison of the estimates with the experimental morphology data shows good agreement between them.
The article presents the study of ZnO–Al2O3 thin coatings prepared by a polymer-salt method using the polyvinylpyrrolidone and zinc nitrate and tin (IV) chloride solutions. The materials were studied by spectroscopic methods and SEM analysis. It was found that prepared coatings have transparency in visible spectral range and demonstrate the ability to generate singlet oxygen under UV irradiation.
The processes of the noncatalytic synthesis of structures with CdTe nanowires by magnetron sputtering deposition are studied. It is shown that the deposition of magnetron sputtered CdTe onto...
This study investigates the growth of gallium arsenide nanowires, using lead as a catalyst. Typically, nanowires are grown through the vapor–solid–liquid mechanism, where a key factor is the reduction in the nucleation barrier beneath the catalyst droplet. Arsenic exhibits limited solubility in conventional catalysts; however, this research explores an alternative scenario in which lead serves as a solvent for arsenic, while gallium and lead are immiscible liquids. Liquid lead easily dissolves in Si as well as in GaAs. The preservation of the catalyst during the growth process is also addressed. GaAs nanowires have been grown by molecular beam epitaxy on silicon Si (111) substrates at varying temperatures. Observations indicate the spontaneous doping of the GaAs nanowires with both lead and silicon. These findings contribute to a deeper understanding of the VLS mechanism involved in nanowire growth. They are also an important step in the study of GaAs nanowire-doping processes.