The direct integration of epitaxial III-V and III-N heterostructures on Si substrates is a promising platform for the development of optoelectronic devices. Nanowires, due to their unique geometry, allow for the direct synthesis of semiconductor light-emitting diodes (LED) on crystalline lattice-mismatched Si wafers. Here, we present molecular beam epitaxy of regular arrays n-GaN/i-InGaN/p-GaN heterostructured nanowires and tripods on Si/SiO2 substrates prepatterned with the use of cost-effective and rapid microsphere optical lithography. This approach provides the selective-area synthesis of the ordered nanowire arrays on large-area Si substrates. We experimentally show that the n-GaN NWs/n-Si interface demonstrates rectifying behavior and the fabricated n-GaN/i-InGaN/p-GaN NWs-based LEDs have electroluminescence in the broad spectral range, with a maximum near 500 nm, which can be employed for multicolor or white light screen development.
We demonstrate the possibility of selective-area growth of ordered arrays of GaN nanowires by molecular beam epitaxy on SiOx/Si substrates patterned by photolithography with microspherical lenses without the preliminary formation of seed layers. The effect of the substrate temperature on the morphological properties of the obtained arrays of nanowitres is studied. The optimal growth parameters ensuring the selective-area growth of GaN nanowires are experimentally found.
The passivation influence by ligands coverage with trioctylphosphine oxide (TOPO) and TOPO including colloidal CdSe/ZnS quantum dots (QDs) on optical properties of the semiconductor heterostructure, namely an array of InP nanowires (NWs) with InAsP nanoinsertion grown by Au-assisted molecular beam epitaxy on Si (111) substrates, was investigated. A significant dependence of the photoluminescence (PL) dynamics of the InAsP insertions on the ligand type was shown, which was associated with the changes in the excitation translation channels in the heterostructure. This change was caused by a different interaction of the ligand shells with the surface of InP NWs, which led to the formation of different interfacial low-energy states at the NW-ligand boundary, such as surface-localized antibonding orbitals and hybridized states that were energetically close to the radiating state and participate in the transfer of excitation. It was shown that the quenching of excited states associated with the capture of excitation to interfacial low-energy traps was compensated by the increasing role of the “reverse transfer” mechanism. As a result, the effectiveness of TOPO-CdSe/ZnS QDs as a novel surface passivation coating was demonstrated.
The article presents the study of ZnO–Al2O3 thin coatings prepared by a polymer-salt method using the polyvinylpyrrolidone and zinc nitrate and tin (IV) chloride solutions. The materials were studied by spectroscopic methods and SEM analysis. It was found that prepared coatings have transparency in visible spectral range and demonstrate the ability to generate singlet oxygen under UV irradiation.
The reduction of substrate temperature is important in view of the integration of III–V materials with a Si platform. Here, we show the way to significantly decrease substrate temperature by introducing a procedure to create nanoscale holes in the native-SiOx layer on Si(111) substrate via In-induced drilling. Using the fabricated template, we successfully grew self-catalyzed GaAs nanowires by molecular-beam epitaxy. Energy-dispersive X-ray analysis reveals no indium atoms inside the nanowires. This unambiguously manifests that the procedure proposed can be used for the growth of ultra-pure GaAs nanowires.
Subject of study. The subject of this study was the integration of indium gallium nitride (InGaN) nanowires with silver nanoparticles and the examination of the photoluminescent properties of the resulting hybrid nanostructures. Aim of study. This study aimed to improve the luminescent characteristics of InGaN nanowires by decorating their surface with colloidal silver nanoparticles. Method. Silver nanoparticles of various sizes and nanoparticles with a silver/silicon oxide core/shell structure were synthesized using colloidal chemistry. Indium gallium nitride nanowires were fabricated using molecular beam epitaxy. The morphology and dimensions of the obtained samples were studied using scanning electron microscopy. The optical properties were characterized using spectral methods. Main results. A red shift in the wavelength of the localized plasmon resonance of the nanoparticles was demonstrated with increasing diameter and passivation of the nanoparticle surface by a silicon oxide shell. Nanowires with a spontaneously formed InGaN/GaN core–shell structure exhibiting photoluminescence at room temperature in the yellow-orange region were synthesized. It was shown for the first time to our knowledge that the deposition of colloidal silver/silicon oxide nanoparticles onto the surface of InGaN nanowires leads to an increase in the photoluminescence intensity of the initial structures by a factor of 2.2. Practical significance. InGaN nanowires are promising solid-state nanostructures for the fabrication of visible-light-emitting devices integrated with a silicon platform. The synthesis of hybrid nanostructures based on InGaN nanowires and silver nanoparticles can increase the luminescence efficiency of the original nanowires. In particular, the hybrid nanostructure proposed herein can be used to develop optically pumped subwavelength lasers based on InGaN nanowires.