In this study, the mechanical and biocorrosion behavior of as-cast Zn-xCu-0.1Sr (x = 1, 2, and 3wt%) alloys for potential application was studied. The microstructure, mechanical properties, and in vitro degradation of Zn-xCu-0.1Sr alloys were investigated. The results show that as Cu content increased from 1.0 to 3.0wt%, the number of CuZn5 phases increased and the average grain size of CuZn5 phases increased from 6.96 μm to 10.92 μm. The 2wt% addition of Cu resulted in the best mechanical properties with 129.4 MPa in ultimate tensile strength and 108.4 MPa in yield strength. Furthermore, the higher corrosion rate was experienced in the alloys with higher Cu content after immersion. Zn-xCu-0.1Sr alloys all presented appropriate in vitro degradation rates in a basically uniform degradation mode. The strength, ductility and biocorrosion property exhibited by the Zn-2Cu-0.1Sr alloy compositions make it a promising candidate for cardiovascular stent applications.
Laser Powder Bed Fusion (LPBF) is an additive manufacturing process that builds parts by layer-by-layer spreading and selective laser melting of metal powders. The characteristics of the powder bed are closely related to laser parameters and the particle size distribution of the metal powder. However, the actual stacking height of the powder bed changes dynamically due to shrinkage during powder spreading, melting, and solidification. This study investigates the actual stacking height of metal powders by analyzing powder flow behavior during falling, spreading, melting, and solidification using the Discrete Element Method (DEM) and Computational Fluid Dynamics (CFD). The results show that height shrinkage caused by powder spreading can be eliminated by increasing the gap between the blade and the working platform from 0 μm to 20 μm. The shrinkage rates due to solidification and liquid metal flow were found to be 8.5% and 31.5%, respectively. Furthermore, mathematical models relating the actual stacking height to layer thickness, number of layers, and solidification shrinkage were established, providing a theoretical foundation for LPBF processes with larger layer thicknesses, as well as for support structure design, printing accuracy, and allowance planning.
1 January 2016 in International Journal of Materials Science and Applications
Hydrogen content in pure aluminum melting was increased through inserting fresh branches and measured by decompression solidification method and density method. Resistivity of pure aluminum casting was measured by means of the electrical resistance method, and physical model of resistivity measuring method was established. Combined with experimental data, the mathematical relationship between resistivity of pure aluminum casting and hydrogen content was derived. To further verify the feasibility of resistivity measurement model on the hydrogen content in aluminum melting, this paper also has carried on the hydrogen evolution experiment.