A vector curvature and temperature sensor based on an in-fiber hybrid microstructure is proposed and experimentally demonstrated. The proposed scheme enables the dimensions of the Fabry–Perot and Mach–Zehnder hybrid interferometer to be adjusted for the formation of the Vernier effect by simply changing the length of a single optical fiber. The sensor is fabricated using a fiber Bragg grating (FBG), multimode fiber (MMF), and a single-hole dual-core fiber (SHDCF). The sensor exhibits different curvature sensitivities in four vertical directions, enabling two-dimensional curvature sensing. The temperature and curvature sensitivities of the sensor were enhanced to 100 pm/°C and −25.55 nm/m−1, respectively, and the temperature crosstalk was minimal at −3.9 × 10−3 m−1/°C. This hybrid microstructure sensor technology can be applied to high-sensitivity two-dimensional vector curvature and temperature detection for structural health monitoring of buildings, bridge engineering, and other related fields.
In the near-zero negative dispersion region of highly nonlinear fiber, the process of wavelength conversion based on the mechanism of intra-pulse stimulated Raman scattering is sensitive to the parameters of pumping pulse and fiber length under the combined effects of nonlinearity and dispersion. Therefore, we experimentally demonstrate the process in detail by using conventional soliton pulses with three sets of pulse parameters and two highly nonlinear fiber lengths of 400 m and 500 m. The experimental results show that, under the combined action of dispersion and several types of nonlinear mechanisms, the wavelength conversion processes are apparently different when using pulses with different parameters to pump different lengths of highly nonlinear fibers. Specifically, the separation degree of the frequency-shifted pulse spectrum and pumping pulse spectrum, and the corresponding redshift rate and pump power consumption all show significantly different results. The experimental results can guide the selection of more suitable parameters for the pumping pulse and the length of highly nonlinear fiber to achieve a better effect of wavelength redshift or spectrum broadening for various practical applications.
A novel mode-locking method based on nonlinear multimode interference (NLMI) using a distributed large-core (105 μm) graded-index multimode fiber (GIMF)-based saturable absorber (SA) capable of generating four pulse modes is proposed. The distributed SA geometry consists of two GIMFs located at different positions in the resonant cavity. The coupling and joint operation not only facilitate resistance to pulse fragmentation but also provide a sophisticated and widely tunable transmission with saturable and reverse saturable absorption phenomena. Based on this, dissipative soliton (DS), dissipative soliton resonance (DSR), wedge-shaped, and staircase pulses are achieved without additional filters. The DS has accessible output power, pulse energy, bandwidth, and duration of up to 15.33 mW, 2.02 nJ, 22.63 nm, and ~1.68 ps. The DSR has an achievable pulse duration and energy of ~32.39 ns, 30.3 nJ. The dispersion range that allows DS operation is studied, and the dynamics of the evolution from DS to DSR are observed. The versatility, flexibility, and simplicity of the SA device, combined with the possibility of scaling the pulse energy, make it highly attractive for ultrafast optics and nonlinear dynamics.
An experimental investigation was conducted to evaluate the statistical properties and scintillation mitigation performance of multi-aperture free-space optical transmission under real-measured atmospheric turbulence. Continuous monitoring of turbulence parameters over a 24 h period showed that the atmospheric coherence length ranged from 3 to 29 cm, indicating that the experimental link operated predominantly under weak-to-moderate turbulence conditions, while a limited number of measurement intervals exhibited relatively strong scintillation and were included for statistical modelling analysis. An 865 m four-channel receiving link was constructed under the measured turbulence conditions to acquire irradiance data for analysis. The results show that the multi-aperture reception significantly suppresses scintillation, reducing the scintillation index from 0.36 to 0.04 under moderate turbulence. The irradiance probability density functions were fitted using lognormal, Gamma–Gamma, exponentiated Weibull, and Málaga (M) distributions. The M distribution exhibited superior adaptability, with fitting accuracy improved by 18.75% under weak turbulence and 13.16% under moderate turbulence. Further analysis shows that the shape parameters of the M distribution vary systematically with turbulence strength, effectively capturing the turbulence-induced evolution of irradiance statistics and providing experimental support for turbulence channel modelling and the optimisation of FSO diversity reception architectures.
A composite dual-cavity passively mode-locked fiber laser based on a functionalized microsphere resonator is proposed and experimentally demonstrated. The nonlinear response of the resonator is enhanced by depositing TiO2 film on a SiO2 microsphere, which leads to improved mode-locking performance. The wavelength selectivity and optical field confinement of the microsphere resonator are exploited, allowing it to simultaneously serve as an intracavity narrowband filter and a nonlinear modulation element. The threshold of the mode-locked laser was measured to be as low as 34 mW, and stable mode-locked operation was achieved at a pump power of 105.7 mW, with a pulse duration of 2.8 ns, a repetition rate of 13.88 MHz, and a signal-to-noise ratio of 74.86 dB. The output spectrum exhibited a central wavelength of 1560.12 nm, a 3 dB linewidth of 0.06 nm, and a side-mode suppression ratio of 55.13 dB. This straightforward design provides an effective approach for the miniaturization of passively mode-locked fiber lasers.