Binbin Wang

Binbin Wang


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 September 2026 in Materials
Verified
Journal Article
Open access
PDF file
Lei LuoLei Luo
Lei Luo
CLCan Luo
Can Luo
QLQi Lv
Qi Lv
XLXiao Liang
Xiao Liang
Liang WangLiang Wang
Liang Wang
BWBinbin Wang
Binbin Wang
Aluminum–copper alloys, typified by ZL205A (AlCu5MnTiCdV, GB/T 1173), pose severe casting challenges due to their wide solidification interval, poor fluidity, and susceptibility to gas porosity and shrinkage defects. This study introduces a negative-pressure frozen sand mold casting process as a solution to these challenges and systematically quantifies its thermal and microstructural advantages over conventional resin sand and atmospheric frozen sand casting. Using inverse heat conduction analysis of multi-point thermocouple data, the interfacial heat transfer coefficient (IHTC) was quantitatively determined for 14 experimental conditions varying in mold type, pressure level, moisture content (2–6 wt.%), and initial freezing temperature (−20 to −40 °C). The results demonstrate that negative pressure combined with frozen sand molds (6 wt.% moisture, −40 °C) produces the highest active-period average IHTC of 236 W/(m2·K), representing a 2.8-fold increase over atmospheric frozen sand casting and a 1.6-fold increase over negative-pressure resin sand casting. This enhanced thermal driving force promotes grain refinement and effective gas removal, yielding superior mechanical properties: tensile strength of 200.6 MPa and elongation of 9.3% in the as-cast state, and 478.5 MPa and 7.4% after T6 heat treatment. Using the optimized process parameters, a thin-walled cabin component (Ø180 mm × 300 mm, minimum wall thickness 3 mm) was successfully fabricated without defects. These findings establish quantitative process–thermal–microstructure–property relationships for negative-pressure frozen sand casting of wide-solidification-interval aluminum alloys.