The laser-induced damage of aluminum alloy 5083 is affected by its surface treatment. Here, we investigate the effects of aluminum alloy’s ability of laser-induced damage on micro-arc oxidation and composite coatings treatment. Results demonstrate a distinct difference of damage parameters on laser pulse duration at 355 nm between micro-arc oxidation and composite coatings treatment on aluminum alloy, including the laser-induced damage threshold, particulate pollutants for different surface treatment, and the damage morphology, respectively. We now find that the threshold of laser-induced damage is improved a lot through simulative calculation and experiments. Furthermore, the experimental results suggests that surface treatment contribute to the number of particulate pollutants and the microstructure of damaged pit.
In the emerging field of laser-driven inertial confinement fusion, Joule heating generated via electromagnetic heating of the metal frame is a critical issue. However, there are few reported models explaining thermal damage to the aluminum alloy. The aim of this study was to build a coupled model for electromagnetic radiation and heat conversion of an ultrashort laser pulse on an aluminum alloy based on Ohm's law. Additionally, the application SiO2 films on aluminum alloy to improve the laser-induced damage threshold (LIDT) were simulated, and the effects of metal impurities in the aluminum alloy were analyzed. A model examining the relation between electromagnetic radiation and heat for a nanosecond laser irradiating an aluminum alloy was developed using a coupled model equation. The results obtained using the finite difference time domain (FDTD) algorithm can provide a theoretical basis for future improvement of the aluminum alloy LIDT.
6 July 2022 in Journal of the American Ceramic Society
Advancements in manufacturing technology have facilitated the use of micro-orifice restrictors (MORs) in aerostatic bearings. However, the understanding of their effectiveness in journal bearings remains limited. This study utilizes FEM for solving the nonlinear Reynolds equation, incorporating velocity terms, to analyze the characteristics of aerostatic journal bearings (AJBs). The concepts of air impedance and pressure range are introduced and applied to explain the advantages of MORs over traditional orifice restrictors (TORs). Furthermore, the centrifugal deformation of the air film induced by high-speed operations and its consequential impact on bearing performance are methodically examined in detail. Finally, an experimental study is executed to confirm the proposed model and support the pertinent design principles. The experiment indicates that the air film thickness, accounting for centrifugal deformation, aligns more closely with the high-speed operating conditions characteristic of AJBs.