Anodizing a simple and effective method to improve the wear resistance of 6061 aluminum alloy. In this study, the microstructure of 6061 aluminum alloy oxide films (AAO) was adjusted by changing the electrolyte temperature (5, 15, and 25 °C) using 160 g/L sulfuric acid as the electrolyte. The phase composition, microstructure, and morphological characteristics of the specimens were detected using X-ray diffractometer and field emission scanning electron microscopy (SEM). The hardness, elastic modulus, and tribological properties of the films were examined using hardness testers and a rotary friction tester. The results showed that as the temperature of the electrolyte increases, the surface of the oxide films changes from uniformly distributed small-sized pores to a coral-like loose porous structure, and the thickness of the films increases. The electrolyte temperature has a significant effect on the friction performance of the AAO films. When the solution temperature decreases from 25 to 5 °C, the steady-state friction coefficient decreases from 0.46 to 0.39. According to the morphology of the wear tracks, it can be determined that the main wear mechanism of AAO films gradually changes from delamination wear to abrasive and adhesive wear, and the wear rate drops by ~69%.
The laser-induced damage of aluminum alloy 5083 is affected by its surface treatment. Here, we investigate the effects of aluminum alloy’s ability of laser-induced damage on micro-arc oxidation and composite coatings treatment. Results demonstrate a distinct difference of damage parameters on laser pulse duration at 355 nm between micro-arc oxidation and composite coatings treatment on aluminum alloy, including the laser-induced damage threshold, particulate pollutants for different surface treatment, and the damage morphology, respectively. We now find that the threshold of laser-induced damage is improved a lot through simulative calculation and experiments. Furthermore, the experimental results suggests that surface treatment contribute to the number of particulate pollutants and the microstructure of damaged pit.