Alpine ski racing is known to be a sport with a high risk of injury and a high proportion of time-loss injuries. In recent years, substantial research efforts with regard to injury epidemiology, injury etiology, potential prevention measures, and measures’ evaluation have been undertaken. Therefore, the aims of this review of the literature were (i) to provide a comprehensive overview of what is known about the aforementioned four steps of injury prevention research in the context of alpine ski racing; and (ii) to derive potential perspectives for future research. In total, 38 injury risk factors were previously reported in literature; however, a direct relation to injury risk was proven for only five factors: insufficient core strength/core strength imbalance, sex (depending on type of injury), high skill level, unfavorable genetic predisposition, and the combination of highly shaped, short and wide skis. Moreover, only one prevention measure (i.e. the combination of less-shaped and longer skis with reduced profile width) has demonstrated a positive impact on injury risk. Thus, current knowledge deficits are mainly related to verifying the evidence of widely discussed injury risk factors and assessing the effectiveness of reasonable prevention ideas. Nevertheless, the existing knowledge should be proactively communicated and systematically implemented by sport federations and sport practitioners.

Background/aim In alpine ski racing, there is limited information about skiers’ mechanical characteristics and their relation to injury risk, in particular for World Cup (WC) competitions. Hence, current findings from epidemiological and qualitative research cannot be linked to skiers’ mechanics. This study was undertaken to investigate whether recently reported differences in numbers of injuries per 1000 runs for competition disciplines can be explained by differences in the skiers’ mechanics. Methods During seven giant slalom, four super-G and five downhill WC competitions, mechanical characteristics of a forerunner were captured using differential global navigation satellite technology and a precise terrain surface model. Finally, the discipline-specific skiers’ mechanics were compared with the respective number of injuries per hour skiing. Results While the number of injuries per hour skiing was approximately equal for all disciplines, kinetic energy, impulse, run time, turn radius and turn speed were significantly different and increased from giant slalom to super-G and downhill. Turn ground reaction forces were largest for giant slalom, followed by super-G and downhill. The number of jumps was doubled from super-G to downhill. Conclusions Associating the number of injuries per hour in WC skiing with skiers’ mechanical characteristics, injuries in super-G and downhill seem to be related to increased speed and jumps, while injuries in giant slalom may be related to high loads in turning. The reported differences in the number of injuries per 1000 runs might be explained by a bias in total exposure time per run and thus potentially by emerged fatigue.

In alpine ski racing the relationships between skier kinetics and kinematics and their effect on performance and injury-related aspects are not well understood. There is currently no validated system to determine all external forces simultaneously acting on skiers, particularly under race conditions and throughout entire races. To address the problem, this study proposes and assesses a method for determining skier kinetics with a single lightweight differential global navigation satellite system (dGNSS). The dGNSS kinetic method was compared to a reference system for six skiers and two turns each. The pattern differences obtained between the measurement systems (offset ± SD) were −26 ± 152 N for the ground reaction force, 1 ± 96 N for ski friction and −6 ± 6 N for the air drag force. The differences between turn means were small. The error pattern within the dGNSS kinetic method was highly repeatable and precision was therefore good (SD within system: 63 N ground reaction force, 42 N friction force and 7 N air drag force) allowing instantaneous relative comparisons and identification of discriminative meaningful changes. The method is therefore highly valid in assessing relative differences between skiers in the same turn, as well as turn means between different turns. The system is suitable to measure large capture volumes under race conditions.

Alpine combined was the only alpine ski racing event at the first Winter Olympic Games in 1936, but since then, slalom, giant slalom, super-G, downhill, and team events have also become Olympic events. Substantial improvements in slope preparation, design of courses, equipment, and the skills of Olympic alpine skiers have all helped this sport attain its present significance. Improved snow preparation has resulted in harder surfaces and improved equipment allows a more direct interaction between the skier and snow. At the same time, courses have become more challenging, with technical disciplines requiring more pronounced patterns of loading – unloading, with greater ground reaction forces. Athletes have adapted their training to meet these new demands, but little is presently known about these adaptations. Here, we describe how Olympic athletes from four of the major alpine ski racing nations prepared for the Olympic Games in South Korea in 2018. This overview describes their typical exercise programs with respect to physical conditioning, ski training and periodization, based on interviews with the coaching staff. Alpine ski racing requires mastery of a broad spectrum of physical, technical, mental, and social skills. We describe how athletes and teams deal with the multifactorial nature of the training required. Special emphasis is placed on sport-specific aspects, such as the combination of stimuli that interfere with training, training with chronic injury, training at altitude and in cold regions, the efficiency and effectiveness of ski training and testing, logistic challenges and their effects on fatigue, including the stress of frequent traveling. Our overall goal was to present as complete a picture of the training undertaken by Olympic alpine skiers as possible and on the basis of these findings propose how training for alpine ski racing might be improved.

A key point in human movement analysis is measuring the trajectory of a person’s center of mass (CoM). For outdoor applications, differential Global Navigation Satellite Systems (GNSS) can be used for tracking persons since they allow measuring the trajectory and speed of the GNSS antenna with centimeter accuracy. However, the antenna cannot be placed exactly at the person’s CoM, but rather on the head or upper back. Thus, a model is needed to relate the measured antenna trajectory to the CoM trajectory. In this paper we propose to estimate the person’s posture based on measurements obtained from inertial sensors. From this estimated posture the CoM is computed relative to the antenna position and finally fused with the GNSS trajectory information to obtain the absolute CoM trajectory. In a biomechanical field experiment, the method has been applied to alpine ski racing and validated against a camera-based stereo photogrammetric system. CoM position accuracy and precision was found to be 0.08 m and 0.04 m, respectively. CoM speed accuracy and precision was 0.04 m/s and 0.14 m/s, respectively. The observed accuracy and precision might be sufficient for measuring performance- or equipment-related trajectory differences in alpine ski racing. Moreover, the CoM estimation was not based on a movement-specific model and could be used for other skiing disciplines or sports as well.

World Cup (WC) alpine ski racing consists of four main competition disciplines (slalom, giant slalom, super-G and downhill), each with specific course and terrain characteristics. The International Ski Federation (FIS) has regulated course length, altitude drop from start to finish and course setting in order to specify the characteristics of the respective competition disciplines and to control performance and injury-related aspects. However to date, no detailed data on course setting and its adaptation to terrain is available. It is also unknown how course and terrain characteristics influence skier speed. Therefore, the aim of the study was to characterize course setting, terrain geomorphology and their relationship to speed in male WC giant slalom, super-G and downhill. The study revealed that terrain was flatter in downhill compared to the other disciplines. In all disciplines, variability in horizontal gate distance (gate offset) was larger than in gate distance (linear distance from gate to gate). In giant slalom the horizontal gate distance increased with terrain inclination, while super-G and downhill did not show such a connection. In giant slalom and super-G, there was a slight trend towards shorter gate distances as the steepness of the terrain increased. Gates were usually set close to terrain transitions in all three disciplines. Downhill had a larger proportion of extreme terrain inclination changes along the skier trajectory per unit time skiing than the other disciplines. Skier speed decreased with increasing steepness of terrain in all disciplines except for downhill. In steep terrain, speed was found to be controllable by increased horizontal gate distances in giant slalom and by shorter gate distances in giant slalom and super-G. Across the disciplines skier speed was largely explained by course setting and terrain inclination in a multiple linear model.