Growing environmental awareness has renewed interest in thorium as a nuclear fuel, underscoring the need for further studies to evaluate how reactors perform when conventional fuels are replaced with thorium-based alternatives. In this study, thermal hydraulics and solid mechanics computations were simulated using COMSOL multiphysics to investigate the safe operating conditions of a heavy water reactor with thorium-based fuel. The thermo-mechanical analysis of the fuel rod under transient heating conditions provides critical insights into strain, displacement, stress, and coolant flow behavior at elevated volumetric heat sources. After 3 s of heating, the strain distribution in the fuel exhibits a high-strain core surrounded by a low-strain rim, with peak volumetric strain increasing nearly linearly from 0.006 to 0.014 as heat generation rises. Displacement profiles confirm that radial deformation is concentrated at the outer surface, while axial elongation remains uniform and scales systematically with power. The resulting von Mises stress fields show maxima at the outer surface, increasing from ~0.06 to 0.15 GPa at the centerline with higher heat input but remaining within structural safety margins. Cladding simulations demonstrate nearly uniform axial expansion, with displacements increasing from ~0.012 mm to 0.03 mm across the investigated power range, and average strain remains negligible (≈10−4), while mean stresses increase moderately yet stay well below the yield strength of zirconium alloys, confirming safe elastic behavior. Hydrodynamic analysis shows that coolant velocity decreases smoothly along the axial direction but maintains stability, with only minor reductions under increased heat sources. Overall, the coupled thermo-mechanical and fluid-dynamic results confirm that both the fuel and cladding remain structurally stable under the studied conditions. By using COMSOL’s multiphysics capabilities, and unlike most legacy codes optimized for uranium-based fuel, this work is designed to easily incorporate non-traditional fuels such as thorium-based systems, including user-defined material properties, temperature-dependent thermal polynomial formulas, and mechanical response.
The growing interest in small modular reactors (SMRs) has created a demand for computational methodologies capable of assessing reactor performance and safety-related behavior during the early stages of design. In this study, reactor thermal-power conditions of 60, 90, and 120 MWth were selected to investigate power-dependent thermal-hydraulic and thermomechanical responses of a thorium-based pressurized water reactor (PWR) fuel rod within a range relevant to low-power SMR concepts. Increasing heat generation and heating time resulted in progressively higher fuel temperatures and stronger mechanical responses. At 536 MW m⁻³ heat flux, the calculated fuel temperature after 10 s exceeded the 1400 °C temperature criterion adopted in the computational assessment. The coolant velocity remained approximately 0.9–1.0 m s⁻¹ over most of the modeled channel. The maximum reported cladding displacement reached approximately 2.2*10-4 m, while the von Mises stress at 10 s increased from approximately 210 MPa at 268 MW m⁻³ to 300 MPa at 536 MW m⁻³. By integrating OpenMC neutron-transport calculations with transient COMSOL Multiphysics simulations, the proposed sequential coupling methodology provides a means of evaluating how fuel driven heat flux influences local heat generation, fuel and clad temperature, coolant behavior, and structural loading. Such an approach could support the preliminary development and comparative evaluation of thorium-fueled SMR configurations, particularly by identifying highly loaded fuel rods and potentially demanding operating conditions before detailed engineering design and experimental validation.