Xinping Mao

Dr. Xinping Mao


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 March 2023 in Materials
Verified
Journal Article
Open access
PDF file
CSChunlei Shang
Chunlei Shang
Hong-Hui WuHong-Hui Wu
Hong-Hui Wu
GPGuangfei Pan
Guangfei Pan
JZJiaqi Zhu
Jiaqi Zhu
WSWang Shuize
Wang Shuize
XMXinping Mao
Xinping Mao
Differing from metal alloys produced by conventional techniques, metallic products prepared by additive manufacturing experience distinct solidification thermal histories and solid−state phase transformation processes, resulting in unique microstructures and superior performance. This review starts with commonly used additive manufacturing techniques in steel−based alloy and then some typical microstructures produced by metal additive manufacturing technologies with different components and processes are summarized, including porosity, dislocation cells, dendrite structures, residual stress, element segregation, etc. The characteristic microstructures may exert a significant influence on the properties of additively manufactured products, and thus it is important to tune the components and additive manufacturing process parameters to achieve the desired microstructures. Finally, the future development and prospects of additive manufacturing technology in steel are discussed.

23 April 2023 in Crystals
Verified
Journal Article
Open access
PDF file
GMGuoqiang Ma
Guoqiang Ma
YCYimian Chen
Yimian Chen
GWGuilin Wu
Guilin Wu
WSWang Shuize
Wang Shuize
TLTianyi Li
Tianyi Li
XMXinping Mao
Xinping Mao
Pipeline steel is a special type of steel used for transporting, for example, oil and natural gas. This study focuses on X80-grade pipeline steel modified with the addition of Nb and Nb-V at different cooling rates (air cooling or quenching) after hot rolling and subjecting it to quenching and tempering heat treatment. Based on multiscale characterization techniques, the effects of microalloying and the cooling rate after hot rolling on the microstructure, precipitation behavior, and strengthening mechanisms were studied. The results showed that the strengths of quenched steels were higher than those of air-cooled steels, and the increase in strength was more pronounced with the addition of Nb-V than with the addition of Nb alone in the steels. Under the same cooling condition, the strengths of Nb-V-added steels were larger than those of Nb-added steels. Additionally, the Nb-V addition promotes the formation of lath structures. The yield stress of the steels, calculated by using measured microstructural parameters following the linear addition of strengthening, is in good agreement with the measured values.

25 August 2021 in Metals
Verified
Journal Article
Open access
PDF file
LLLeilei Li
Leilei Li
ZCZhen Cai
Zhen Cai
WSWang Shuize
Wang Shuize
HWHuibin Wu
Huibin Wu
YFYuhui Feng
Yuhui Feng
XMXinping Mao
Xinping Mao
Interstitial free (IF) steel is widely used in the automotive industry, due to its excellent deep drawing performance. In this study, in order to study the influence of different rolling processes on the texture evolution and deep drawing performance of IF steel, we conducted rolling experiments on IF steel with different temperatures, different reduction rates, and different lubrication conditions. The impact of texture on the deep drawing performance of the steel was also analyzed. The microscopic and macroscopic texture analyses were performed using electron backscatter diffraction (EBSD) and X-ray diffraction (XRD), respectively. Deep drawing performance was analyzed by measuring the r-value. The results showed that in non-lubricated rolling, the r-value increased with the decrease in the reduction rate, and the r-value increased with the increase in the deformation temperature. The maximum value of r is 0.85. But in the case of lubricated rolling, the r-value increased significantly from 0.74 to 1.47 compared to non-lubricated (keeping the reduction rate and the rolling temperature constant). The lubrication reduced the shear deformation of the steel surface, resulting in a γ texture on the surface. Texture uniformity along the thickness direction resulted in an increase in the r-value of the steel.

23 October 2025 in Materials
Verified
Journal Article
Open access
PDF file
YHYuhe Huang
Yuhe Huang
HYHaisheng Yang
Haisheng Yang
JLJun Lu
Jun Lu
JWJing Wang
Jing Wang
BPBicao Peng
Bicao Peng
XMXinping Mao
Xinping Mao
The steel industry is responsible for 7–9% of global CO2 emissions. Shifting from primary iron ore to recycled scrap in electric arc furnace (EAF) steelmaking offers significant decarbonization potential, reducing carbon intensity by 60–70%. However, increased scrap use in EAF operations leads to higher nitrogen absorption, which can degrade mechanical properties. Nitrogen dissolves into molten steel, where it forms Cottrell atmospheres at dislocations in the following processing steps, intensifying strain aging and reducing ductility. This study establishes a precipitation criterion based on the TiN solubility product to prevent harmful liquid TiN formation, enabling effective nitrogen fixation via fine TiN precipitates (5–20 nm). Multiscale characterization techniques, such as TEM and EBSD, show that Ti reduces the number of mobile N atoms by 60–70%, evidenced by a 50–65% decrease in Snoek/SKK peak intensities. Excessive titanium can refine ferrite grain size and prevents harmful TiN inclusions. Titanium microalloying presents a cost-effective, sustainable strategy to reduce strain aging in scrap-rich EAF steels, enabling more sustainable steel production without sacrificing material properties.

3 February 2026 in Materials
Verified
Journal Article
Open access
PDF file
YHYuhe Huang
Yuhe Huang
FYFangbo Yang
Fangbo Yang
JLJun Lu
Jun Lu
WSWang Shuize
Wang Shuize
XMXinping Mao
Xinping Mao
The utilization of recycled steel is essential for achieving carbon neutrality and sustainable engineering, yet repeated recycling inevitably leads to the accumulation of residual elements that are difficult to remove during conventional refining. Among them, copper (Cu) readily enriches in scrap-based steels and is a primary cause of surface hot shortness during high-temperature processing due to its segregation at the oxide/steel interface. While the compositional effects of Cu have been extensively studied, the influence of thermo-history associated with different industrial processing routes remains poorly understood. In this work, Cu enrichment during high-temperature oxidation was systematically investigated under thermo-histories representative of conventional hot rolling, thin slab continuous casting and rolling (TSCR), and strip casting. Plain carbon steels containing 0.05–0.30 wt.% Cu were oxidized at 1000–1200 °C, and interfacial microstructures were characterized using SEM–EDS. The results show that Cu enrichment is highly sensitive to both temperature and thermal exposure time, with a critical temperature range of 1100–1150 °C promoting the formation of continuous Cu-rich liquid films. Prolonged thermo-history in conventional hot rolling markedly enhances Cu enrichment, TSCR partially suppresses interfacial segregation, whereas strip casting effectively inhibits Cu enrichment even at elevated Cu contents. These findings highlight thermo-history as a dominant factor controlling Cu-induced surface hot shortness and provide guidance for process optimization in recycled steels.

21 October 2025 in Materials
Verified
Journal Article
Open access
PDF file
WSWang Shengwei
Wang Shengwei
MYMingyue Yang
Mingyue Yang
MCMengxiao Chen
Mengxiao Chen
YHYuhe Huang
Yuhe Huang
WSWang Shuize
Wang Shuize
XMXinping Mao
Xinping Mao
In this study, by regulating the heating rate, we have optimized the morphology of retained austenite in a quenching and partitioning (Q&P) steel with initial microstructure consisting of lath martensite. By optimizing the heating rate to 1 °C/s during the heating stage from 700 °C to 830 °C, the formation of blocky austenite and the coarsening of film-like austenite during the two-phase region annealing process were prohibited. Ultimately, this resulted in the production of Q&P steel containing a significant volume fraction (19.0%) of fine film-like retained austenite. This fine and film-like retained austenite exhibits higher stability than blocky austenite, exhibiting an active transformation-induced plasticity (TRIP) effect over a broad strain range. This results in excellent mechanical properties characterized by a high product of tensile strength and elongation (34.1 GPa·%).