In this study, by regulating the heating rate, we have optimized the morphology of retained austenite in a quenching and partitioning (Q&P) steel with initial microstructure consisting of lath martensite. By optimizing the heating rate to 1 °C/s during the heating stage from 700 °C to 830 °C, the formation of blocky austenite and the coarsening of film-like austenite during the two-phase region annealing process were prohibited. Ultimately, this resulted in the production of Q&P steel containing a significant volume fraction (19.0%) of fine film-like retained austenite. This fine and film-like retained austenite exhibits higher stability than blocky austenite, exhibiting an active transformation-induced plasticity (TRIP) effect over a broad strain range. This results in excellent mechanical properties characterized by a high product of tensile strength and elongation (34.1 GPa·%).
This work systematically investigates the high-cycle fatigue (HCF) properties and fatigue crack growth (FCG) behavior of hot-rolled dual-phase (DP) steels with comparable tensile strength but distinctly different yield strength (458 MPa for the FG sample and 355 MPa for the CG sample), grain sizes and morphologies. Contrary to the conventional Hall–Petch relationship, the coarse-grained (CG) sample demonstrates superior fatigue performance. This enhancement is reflected in its higher fatigue strength, combined with an elevated FCG threshold and a reduced FCG rate in the Paris regime of FCG behavior. Fracture morphologies and FCG path analyses reveal that this enhanced fatigue resistance attributes to pronounced crack path tortuosity in the CG microstructure. The tortuous crack path enhances roughness-induced crack closure effects in the near-threshold regime while promoting more frequent crack deflection during stable propagation, collectively reducing the effective driving force for crack growth. The experimental evidence confirms that properly designed CG microstructures with appropriate phase distribution can provide superior fatigue resistance in hot-rolled DP steels.