As part of the Copernicus programme of the European Commission (EC), the European Space Agency (ESA) has developed and is currently operating the Sentinel-2 mission that is acquiring high spatial resolution optical imagery. This article provides a description of the calibration activities and the status of the mission products validation activities after one year in orbit. Measured performances, from the validation activities, cover both Top-Of-Atmosphere (TOA) and Bottom-Of-Atmosphere (BOA) products. The presented results show the good quality of the mission products both in terms of radiometry and geometry and provide an overview on next mission steps related to data quality aspects.

The Atmospheric Correction Inter-comparison eXercise (ACIX) is an international initiative with the aim to analyse the Surface Reflectance (SR) products of various state-of-the-art atmospheric correction (AC) processors. The Aerosol Optical Thickness (AOT) and Water Vapour (WV) are also examined in ACIX as additional outputs of AC processing. In this paper, the general ACIX framework is discussed; special mention is made of the motivation to initiate the experiment, the inter-comparison protocol, and the principal results. ACIX is free and open and every developer was welcome to participate. Eventually, 12 participants applied their approaches to various Landsat-8 and Sentinel-2 image datasets acquired over sites around the world. The current results diverge depending on the sensors, products, and sites, indicating their strengths and weaknesses. Indeed, this first implementation of processor inter-comparison was proven to be a good lesson for the developers to learn the advantages and limitations of their approaches. Various algorithm improvements are expected, if not already implemented, and the enhanced performances are yet to be assessed in future ACIX experiments.

Combining data from multiple sensors into a single seamless time series, also known as data interoperability, has the potential for unlocking new understanding of how the Earth functions as a system. However, our ability to produce these advanced data sets is hampered by the differences in design and function of the various optical remote-sensing satellite systems. A key factor is the impact that calibration of these instruments has on data interoperability. To address this issue, a workshop with a panel of experts was convened in conjunction with the Pecora 20 conference to focus on data interoperability between Landsat and the Sentinel 2 sensors. Four major areas of recommendation were the outcome of the workshop. The first was to improve communications between satellite agencies and the remote-sensing community. The second was to adopt a collections-based approach to processing the data. As expected, a third recommendation was to improve calibration methodologies in several specific areas. Lastly, and the most ambitious of the four, was to develop a comprehensive process for validating surface reflectance products produced from the data sets. Collectively, these recommendations have significant potential for improving satellite sensor calibration in a focused manner that can directly catalyze efforts to develop data that are closer to being seamlessly interoperable.

Obtaining detailed observations of the amount and condition of vegetation is an important issue for describing, understanding and modelling the role of the biosphere in the global carbon cycle. Here, multispectral optical imagery was used for retrieving biophysical variables through the inversion of a 3-D radiative transfer model. Two inversion procedures are presented: a classical procedure for high resolution imagery and an innovative procedure specifically designed for very high resolution imagery (resolution around 1 m). They were tested with SPOT ('Satellite Pour l'Observation de la Terre') and Ikonos images, respectively. One of the objectives was to assess to which extent the inversion of high and very high resolution satellite imagery can help in assessing how Fontainebleau forest (France) was damaged by a very strong storm on December 1999. Retrieved biophysical variables are: Leaf Area Index (LAI), Crown Coverage (CC) and leaf chlorophyll concentration (C _ab). Compared with ground measurements, SPOT-derived LAI has a root mean square error (RMSE) of around 1.4 at stand scale. This is not accurate enough to quantify the effects of the storm. However, LAI variation was assessed at a forest scale. On the other hand, the innovative procedure applied to Ikonos data led to more accurate results. For example, the relative error between estimated and ground measured LAI was improved, on average, from 23% (using 20 m resolution imagery) to 6% (using very high resolution imagery).

Land remote sensing capabilities in the optical domain have dramatically increased in the past decade, owing to the unprecedented growth of space-borne systems providing a wealth of measurements at enhanced spatial, temporal and spectral resolutions. Yet, critical questions remain as how to unlock the potential of such massive amounts of data, which are complementary in principle but inherently diverse in terms of products specifications, algorithm definition and validation approaches. Likewise, there is a recent increase in spatiotemporal coverage of in situ reference data, although inconsistencies in the used measurement practices and in the associated quality information still hinder their integrated use for satellite products validation. In order to address the above-mentioned challenges, the European Space Agency (ESA), in collaboration with other Space Agencies and international partners, is elaborating a strategy for establishing guidelines and common protocols for the calibration and validation (Cal/Val) of optical land imaging sensors. Within this paper, this strategy will be illustrated and put into the context of current validation systems for land remote sensing. A reinforced focus on metrology is the basic principle underlying such a strategy, since metrology provides the terminology, the framework and the best practices, allowing to tie measurements acquired from a variety of sensors to internationally agreed upon standards. From this general concept, a set of requirements are derived on how the measurements should be acquired, analysed and quality reported to users using unified procedures. This includes the need for traceability, a fully characterised uncertainty budget and adherence to community-agreed measurement protocols. These requirements have led to the development of the Fiducial Reference Measurements (FRM) concept, which is promoted by the ESA as the recommended standard within the satellite validation community. The overarching goal is to enhance user confidence in satellite-based data and characterise inter-sensor inconsistencies, starting from at-sensor radiances and paving the way to achieving the interoperability of current and future land-imaging systems.

Satellite Earth Observation (EO) sensors are becoming a vital source of information for land surface monitoring. The concept of the Virtual Constellation (VC) is gaining interest within the science community owing to the increasing number of satellites/sensors in operation with similar characteristics. The establishment of a VC out of individual missions offers new possibilities for many application domains, in particular in the fields of land surface monitoring and change detection. In this context, this paper describes the Copernicus Sen2Like algorithms and software, a solution for harmonizing and fusing Landsat 8/Landsat 9 data with Sentinel-2 data. Developed under the European Union Copernicus Program, the Sen2Like software processes a large collection of Level 1/Level 2A products and generates high quality Level 2 Analysis Ready Data (ARD) as part of harmonized (Level 2H) and/or fused (Level 2F) products providing high temporal resolutions. For this purpose, we have re-used and developed a broad spectrum of data processing and analysis methodologies, including geometric and spectral co-registration, atmospheric and Bi-Directional Reflectance Distribution Function (BRDF) corrections and upscaling to 10 m for relevant Landsat bands. The Sen2Like software and the algorithms have been developed within a VC establishment framework, and the tool can conveniently be used to compare processing algorithms in combinations. It also has the potential to integrate new missions from spaceborne and airborne platforms including unmanned aerial vehicles. The validation activities show that the proposed approach improves the temporal consistency of the multi temporal data stack, and output products are interoperable with the subsequent thematic analysis processes.