The shunt active power filters (SAPFs) are broadly utilized to improve the power quality (PQ) issues of electric power systems. A crucial issue in implementing these filters is the accurate estimation of the grid voltage phase/frequency. Indeed, the dynamic behavior and the performance of the SAPF strongly rely on this point. To deal with this challenge, a fast yet effective open-loop synchronization (OLS) technique based on Cascaded Delayed Signal Cancellation (CDSC) is presented in this paper. The proposed technique can reject the odd-order harmonics, the DC offset of the grid voltage, and its dynamic response during transients take an only half cycle of the fundamental frequency. To adapt the proposed OLS technique to the frequency changes, an efficient frequency estimator is also presented. The effectiveness of the proposed OLS technique is demonstrated using simulation and experimental results.

This paper proposes a cost-effective compensator to suppress harmonics and compensate the power factor of all-electric shipboard power systems (SPSs). This compensator, which is based on a fixed capacitor-thyristor controlled reactor (FC-TCR), behaves as a low-pass filter and therefore can reject both low and high-order harmonics. Moreover, the FC-TCR compensator is featured by the low switching losses; hence, it can effectively be implemented for low and medium voltage applications. The design of the filter is detailed via equivalent lossy circuits, which exhibit the mechanism of the harmonic mitigation. Furthermore, theoretical analyses and mathematical developments are suggested to enhance the filtering performance. Besides, details of the Fixed-Point iteration technique which is applied to extract the firing angle of the TCR are conducted. A practical SPS is selected to ensure and demonstrate the performance of proposed methodology via thorough simulations under MATLAB/Simulink environment. The obtained results verify the theoretical analyses and confirm the effectiveness of proposed solution.

Introduction. Recently, wind power generation has grown at an alarming rate in the past decade and will continue to do so as power electronic technology continues to advance. Purpose. Super-twisting sliding mode control for brushless doubly-fed reluctance generator based on wind energy conversion system. Methods. This paper deals with the robust power control of a grid-connected brushless doubly-fed reluctance generator driven by the variable speed wind turbine using a variable structure control theory called sliding mode control. The traditional sliding mode approach produces an unpleasant chattering phenomenon that could harm the system. To eliminate chattering, it is necessary to employ a high-order sliding mode controller. The super-twisting algorithm is one type of nonlinear control presented in order to ensure the effectiveness of the control structure we tested these controllers in two different ways reference tracking, and robustness. Results. Simulation results using MATLAB/Simulink have demonstrated the effectiveness and robustness of the super-twisting sliding mode controller.

Introduction. Nowadays, global investment in renewable energy sources has been growing intensely. In particular, we mention here that wind source of energy has grown recently. Purpose. Comparative study between sliding mode control and vector control of a brushless doubly fed reluctance generator based on wind energy conversion systems. Methods. This paper deals with conceptual analysis and comparative study of two control techniques of a promising low-cost brushless doubly-fed reluctance generator for variable-speed wind turbine considering maximum power point tracking. This machine's growing interest because of the partially rated power electronics and the high reliability of the brushless design while offering performance competitive to its famous spring counterpart, the doubly-fed induction generator. We are particularly interested in comparing two kinds of control methods. We indicate here the direct vector control based on Proportional-Integral controller and sliding mode controller. Results. Simulation results show the optimized performances of the vector control strategy based on a sliding mode controller. We observe high performances in terms of response time and reference tracking without overshoots through the response characteristics. The decoupling, the stability, and the convergence towards the equilibrium are assured.

In this work we studied the behavior of the photovoltaic panels in a uniform and non uniform illumination conditions on the module surface. For this a group of UDTS50 PV panels was modeled and simulated under Matlab/Simulink environment toward discuss and compare the external characteristics in the two studied situations. The simulation results obtained shows well the effect of the shadow in a photovoltaic installation, which requires particular precautions in order to guarantee the maximum power possible under all operation conditions.

A well-prepared abstract enables the reader to identify the basic content of a document quickly and accurately,). This work presents consideration and use of the asynchronous generator in the production of wind energy. To do this, a model of the wind turbine has been established, the mathematical model of the doubly fed induction generator (DFIG) variable speed is presented and the control quantities used when integrated with a wind system. A modeling in a diphasic reference mark related to the stator field and a strategy vector control active and reactive power are offered with a PWM and SVM technique for inverter control is considered in our work.