AbdulAziz AlGhamdi

AbdulAziz AlGhamdi


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 June 2025 in Processes
Verified
Journal Article
Open access
PDF file
ABAhmed Abdekader Abdo Bhran
Ahmed Abdekader Abdo Bhran
STSRINIVAS TADEPALLI
SRINIVAS TADEPALLI
KMKasibatla S. R. Murthy
Kasibatla S. R. Murthy
AAAbdulAziz AlGhamdi
AbdulAziz AlGhamdi
This study investigates the adsorption and desorption efficiencies of Cu (II) and Cd (II) from industrial effluents using orange peel powder and a newly developed mixed adsorbent composed of equal parts of activated charcoal (AC) and bone charcoal (BC). The mixed adsorbent (AC + BC) exhibited significantly higher removal efficiencies for both copper and cadmium metal ions compared to orange peel powder. This can be attributed to the high surface area of AC and the negative surface charge of BC, resulting in a synergistic adsorption effect. Batch adsorption experiments were conducted in an orbital shaker at 150–180 rpm for 60 min, followed by thorough rinsing to remove any residual metal ions. The optimal pH for maximum adsorption of Cu (II) and Cd (II) was found to be 6. The effects of adsorbent dosage (ranging from 0.5 to 5 g/L) and contact time (ranging from 15 min to 4 h) on adsorption performance were systematically studied. Regeneration experiments using 0.2 M HCl demonstrated that the adsorption of Cu (II) and Cd (II) on the mixed adsorbent was highly reversible, achieving desorption efficiencies of 90% and 94%, respectively. Notably, Cd (II) consistently exhibited higher desorption rates across all tested dosages. These results confirm the potential of the proposed adsorbent and regeneration strategy for efficient and economical removal of heavy metals from industrial wastewater.

4 December 2025 in Frontiers in Chemistry
Verified
Journal Article
Open access
PDF file
AAAbdulAziz AlGhamdi
AbdulAziz AlGhamdi
STSyed Ali Ammar Taqvi
Syed Ali Ammar Taqvi
BKBilal Kazmi
Bilal Kazmi
SNSalman Raza Naqvi
Salman Raza Naqvi
A sustainable production of ammonia using waste biomass is a new milestone to a low-carbon bioeconomy that is circular. This paper defines an integrated Aspen Plus model which integrates the steam gasification of paper mill sludge and municipal solid waste and the Haber-Bosch process to generate carbon-neutral green ammonia. The synthesis of thermochemical conversion and catalytic synthesis was optimized systematically by altering paper mill sludge feed ratio (20:80, 60:40, and 40:60 wt%), steam toward municipal solid waste ratio and pressures in the synthesis. The highest hydrogen yield (H 2 = 0.4572) and heating value (7.82 MJ/Nm 3 ) was obtained in the 60:40 blend at 800 °C and S/B = 0.025, whereas the highest NH 3 mole fraction in the solution (0.9493) was obtained under 40:60 blend at 500 °C and 250 bar. The addition of cryogenic CO 2 removal and water gas shift optimization greatly improved the purification of hydrogen and total carbon capture. The innovation of the work consists in the combined modelling structure that converts heterogeneous waste flows into a closed-loop, low-emission system of ammonia production, which has two advantages in the value of waste and the synthesis of renewable fertilizers. The results present an upscale able and ecologically friendly pathway to next-generation production of ammonia, between circular waste management and green chemical production.

18 December 2025 in Polymers
Verified
Journal Article
Open access
PDF file
AAAbdulAziz AlGhamdi
AbdulAziz AlGhamdi
IAImtiaz Ali
Imtiaz Ali
Salman Raza NaqviSalman Raza Naqvi
Salman Raza Naqvi
End-of-life wind turbine blade accumulation is a growing global materials management problem and current industrial recycling routes for glass fiber-reinforced polymer composites remain limited in material recovery value. There is limited understanding on how to recover clean glass fibers while keeping thermal exposure and energy input low, and existing studies have not quantified whether very short isothermal thermal residence can still result in complete matrix removal. The hypothesis of this study is that a mild two-step thermochemical sequence can recover clean glass fibers at lower temperature and near zero isothermal dwell if pyrolysis and oxidation are separated. We used wind-blade epoxy-based GFRP in a step-batch reactor and combined TGA-based thermodynamic mapping, short pyrolysis at 425 °C, and mild oxidation at 475 °C with controlled dwell from zero to thirty minutes. We applied model-free kinetics and machine learning methods to quantify activation energy trends as a function of conversion. The thermal treatment of 425 °C for zero minutes in nitrogen, followed by 475 °C for fifteen minutes in air, resulted in mechanically sound, visually clean white fibers. These fibers retained 76% of the original tensile strength and 88% of the Young’s modulus, which indicates the potential for energy-efficient GFRP recycling. The activation energy was found to be approximately 120 to 180 kJ mol−1. These findings demonstrate energy lean recycling potential for GFRP and can inform future industrial scale thermochemical designs.