This study investigates the influence of cooling rates on the microstructure and phase transformations of the high-entropy alloy Cr16Mn16Fe16Co16Ni16P20. The alloy was synthesized via arc melting and subjected to three cooling conditions: slow cooling (52 K/s), accelerated cooling after a short electric arc pulse (3018 K/s), and rapid quenching (10⁵–10⁶ K/s) using the melt-spinning method. The microstructures were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Mössbauer spectroscopy. The thermal properties and phase transformations were analyzed using differential scanning calorimetry (DSC) and thermography. Slow cooling produced a complex crystalline microstructure, while accelerated cooling resulted in fewer phases. Rapid cooling yielded an amorphous structure, demonstrating that phosphorus and high mixing entropy enhance glass-forming ability. Phase transformations exhibited significant undercooling under accelerated cooling, with FCC phase crystallization shifting from 1706 K (slow cooling) to 1341 K, and eutectic crystallization from 1206 K to 960 K. These findings provide a foundation for optimizing cooling processes in high-entropy alloys for advanced structural and functional applications.
This study investigates the Fe22Ni16Co19Mn12Cr16P15 alloy designed to enhance glass-forming ability. The alloy was synthesized by arc melting and examined using infrared thermography, differential scanning calorimetry (DSC), scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS), and X-ray diffraction (XRD). Thermographic measurements revealed a temperature arrest at ~1007 K associated with eutectic crystallization, accompanied by contraction visible as a flattened ingot surface. DSC confirmed the dominant eutectic transformation (−170.7 J/g). Compared with the previously studied Fe22Ni16Co19Mn12Cr16P15 alloy, this composition showed a simplified transformation sequence and a larger eutectic fraction. DSC of melt-spun ribbons demonstrated a three-step crystallization (659 K, 699 K, 735–773 K, completion ~820 K) with a total enthalpy of 180.4 J/g. The broad crystallization interval (ΔTc ≈ 161 K) indicates enhanced thermal stability compared with simpler Ni–P or Fe–Ni–P–C alloys. SEM/EDS observations revealed eutectic colonies with predominantly rod-like morphology and chemical partitioning in inter-colony regions, favoring precipitation of transition metal phosphides. XRD confirmed four crystalline phases (Fe–Ni, CrCoP, Ni3P, MnNiP) in ingots, while ribbons exhibited a fully amorphous structure. These findings demonstrate that Fe22Ni16Co19Mn12Cr16P15 possesses good glass-forming ability but forms multiple phosphides under slower cooling. Precise cooling control is thus essential for tailoring its amorphous or crystalline state.