Mengmeng Liu

Mr. Mengmeng Liu

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 November 2025 in Sensors
Verified
Journal Article
Open access
PDF file
MLMengmeng Liu
Mengmeng Liu
GLGang Liu
Gang Liu
MZMingzhi Zhao
Mingzhi Zhao
XZXin Zhang
Xin Zhang
KYKai Yang
Kai Yang
YCYang Chen
Yang Chen
Terrestrial three-dimensional laser scanning, which plays a crucial role in engineering surveying for assessing the surface smoothness of highway embankments by providing a level of precision and continuous three-dimensional information that conventional measurement methods cannot achieve, is examined in this study through a series of field experiments designed to determine how station location, including sampling interval, station distance, and scanning angle, influences point cloud density, spatial distribution, laser reflectivity, and surface reconstruction accuracy, and the results demonstrate that point cloud quantity decreases as sampling interval, station distance, and scanning angle increase, that the resolution of reconstructed surface undulations diminishes accordingly, that scanning angle has only a limited effect on reconstruction fidelity, that locating the instrument as close as feasible to the target area and adopting a sampling interval of 0.03 m achieves an effective balance between measurement accuracy and operational efficiency, and that optimizing parameter selection by analyzing elevation deviations at key points enhances both data quality and model precision, thereby confirming the suitability of the proposed approach for reliable highway embankment condition monitoring.

1 December 2021 in Ecological Chemistry and Engineering S
Verified
Journal Article
Open access
PDF file
LZLu Zhang
Lu Zhang
MLMengmeng Liu
Mengmeng Liu
By using the experimental study method, the working properties and mechanical properties of grouting materials were determined by changing the cement-sand ratio, water-cement ratio, and cement admixtures. The main factors affecting the properties of grouting materials and the mutual influence rules of various factors are analysed and determined, and the best value range is obtained. Finally, the compressive strength of 28-day ordinary Portland cement structure grouting is optimised to 50-80 MPa. Based on the grouting ratio of ordinary Portland cement, an experimental study on the early strength structure paste of sulphate aluminate cement was carried out. The paste with one day strength as high as 70 MPa and good compatibility was prepared, and the early strength change law of the optimum ratio was deduced.

19 July 2026 in Materials
Verified
Journal Article
Open access
PDF file
MLMengmeng Liu
Mengmeng Liu
LZLu Zhang
Lu Zhang
小张小鸥 张
小鸥 张
WXWenwen Xing
Wenwen Xing
WZWenhua Zhu
Wenhua Zhu
ZHZhongjing Hu
Zhongjing Hu
With the increasing demand for tunnel construction under extreme geological conditions such as high geo-stress, rock bursts, and fault zones, the performance requirements for shotcrete in initial support systems have become more stringent. This study develops a cross-scale structured hybrid fiber-reinforced shotcrete by incorporating alkali-resistant glass fibers including HP and HD types with different lengths and carbon nanotubes (CNTs) into a conventional shotcrete matrix. An orthogonal experimental design at four factors and four levels was adopted to investigate the effects of fiber and CNT contents on the mechanical properties and microstructure of shotcrete. Uniaxial compressive strength, splitting tensile strength, slumping, rebound rate, and microscopic characteristics such as SEM were evaluated at 3, 7, and 28 days. Results show that the optimal mix proportion is 4% HP fiber (24 mm), 2% HD fiber (18 mm), 2% HD fiber (6 mm), and 0.2% CNT. Under this formulation, the 28-day compressive and splitting tensile strengths reached 43.53 MPa and 4.85 MPa, respectively, with a rebound rate as low as 3.85%. The enhanced performance is attributed to the multi-scale reinforcement mechanism. Long fibers suppress macroscopic cracks, short fibers bridge micro-cracks, and CNTs densify the interfacial transition zone. This study provides a parametric reference for the development of high-performance shotcrete and its engineering application in complex underground excavations.

27 July 2026 in Scientific Reports
Verified
Journal Article
Open access
PDF file
MLMengmeng Liu
Mengmeng Liu
KYKai Yang
Kai Yang
LZLu Zhang
Lu Zhang
XZXin Zhang
Xin Zhang
HLHuayun Li
Huayun Li
YYYi Yang
Yi Yang
Although tunnel fires are relatively infrequent, the unique, elongated, and nearly enclosed structure of tunnels exacerbates fire hazards, and their occurrence can result in catastrophic losses, necessitating effective fire safety management. This study examines the characteristics of smoke spread and temperature attenuation in highway tunnel fires under varying heat release rates and longitudinal ventilation velocities, specifically focusing on conditions of traffic congestion. By utilizing a combination of scaled-model experiments and analytical modeling, the research highlights that smoke generated in tunnel fires travels along the tunnel length, with its dispersion heavily influenced by both heat release rates and the presence of congested vehicles. In scenarios without ventilation, smoke ascends to the tunnel crown and propagates symmetrically toward both ends, while the movement of congested vehicles does not significantly affect smoke transport. The introduction of longitudinal ventilation significantly mitigates upstream smoke movement, leading to reduced maximum temperatures near the fire source and preventing smoke recirculation, especially critical during traffic congestion when evacuation routes may be limited. The study identifies critical wind speeds necessary for effective smoke management, revealing that these speeds increase with higher heat release rates. Initial increases in ventilation velocity may temporarily elevate temperatures due to enhanced combustion; however, further increases result in a predominant cooling effect that lowers overall tunnel temperatures. Additionally, the temperature distribution is asymmetrical, with downstream temperatures rising as heat release rates increase. A temperature decay model for tunnel crowns was developed, demonstrating a strong correlation with experimental data and underscoring the effectiveness of longitudinal ventilation in managing high temperatures and controlling smoke flow during tunnel fire incidents, particularly in congested traffic conditions.