Mengtang Xu

Dr. Mengtang Xu


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 January 2019 in Energies
Verified
Journal Article
Open access
PDF file
XWXufeng Wang
Xufeng Wang
DQDongdong Qin
Dongdong Qin
DZDongsheng Zhang
Dongsheng Zhang
WGWeiming Guan
Weiming Guan
MXMengtang Xu
Mengtang Xu
CZChengguo Zhang
Chengguo Zhang
The efficient and safe extraction of ultra-thick coal seam in the Xinjiang East Junggar Basin has been a major focus in the future of mining in China. This paper systematically studied the overburden strata fracturing process and the structure evolution characteristics based on a typical ultra-thick coal seam condition in Xinjiang, using both physical and numerical modeling studies. The interactions between shields and the roof strata were also examined, from the perspective of ground support. The results indicated that roof structure was mainly in the form of voussoir beam at the early mining stage, where overburden stability was affected by the rock mass properties and mining parameters. The support load mainly included top coal and immediate roof gravity load and the load caused by main roof rotary consolidation. As a result of mining disturbance and strata movement, the overlying strata re-fractured in the later mining stage. The roof structure changed from beam to arch gradually and propagates upwards with the increase of multi-layer mining times. The support load was mainly the gravity load of the friable rock mass within compression arch. The results will provide a guideline for the improvement of roof stability under similar mining conditions in Xinjiang.

13 October 2017 in Energies
Verified
Journal Article
Open access
PDF file
XWXufeng Wang
Xufeng Wang
DQDongdong Qin
Dongdong Qin
DZDongsheng Zhang
Dongsheng Zhang
CSChundong Sun
Chundong Sun
CZChengguo Zhang
Chengguo Zhang
BLBo Li
Bo Li
Superhigh-water content material (SCM) has been widely utilized for goaf backfilling, grouting, and fire prevention and extinguishing. In this paper, the engineering mechanical characteristics of superhigh-water content material concretion (SCMC) were studied for two types of backfilling technologies in longwall mining—open-type and pocket-type backfilling. The mechanical properties and responses of the SCMC were assessed under different cementation states, varying loading conditions and at different scales. The results indicate that: (1) the compressive and tensile strengths of SCMC specimens in different cementation states increase as the curing time increases—the SCMC formed by a mixture of SCM and gangues has higher strength than that of pure SCM; (2) the SCMC is under different loading and confinement conditions when different backfilling technologies is applied; however the strength of SCMC increases with curing time and decreases with water volume percentage; and (3) large-size specimens of pure SCMC enter into an accelerated creep state at a leveled load of 1.4 MPa. The effects of SCM backfilling on subsidence control has been verified by field applications. The results presented in this paper can provide data support for the optimization of backfill mining technology using SCM, as well as for the design of hydraulic supports parameters at longwall faces.

15 February 2017 in Minerals
Verified
Journal Article
Open access
PDF file
WZWei Zhang
Wei Zhang
ZYZhi Yang
Zhi Yang
DZDongsheng Zhang
Dongsheng Zhang
XWXufeng Wang
Xufeng Wang
PLPeng Li
Peng Li
MXMengtang Xu
Mengtang Xu
Accurate and efficient acquisition of information about the dynamic characteristics of coalface overburden can provide an important theoretical basis for green mining in coal producing regions in western China. In this study, a novel method for comprehensively detecting the dynamic behavior of coalface overburden is proposed in order to address deficiencies of the existing detection methods. The new method combines surface radon measurement, overburden borehole imaging, and underground pressure observation into a comprehensive detection technology system, resulting in spatial and temporal integration of surface, overburden, and underground detection. To examine the feasibility of the proposed method, a field experiment was carried out at #1103 coalface in the Suancigou Coal Mine, which is operated by the Inner Mongolia Yitai Coal Co. Ltd. The results of the three approaches are largely consistent and they complement one another. But it must be pointed out that this method needs to be further improved by more field experiments. Based on the experimental results, a technique for forced caving by presplit blasting of the overburden was developed and then implemented to #1103 coalface. The practical use of the technique led to good results: it effectively prevented roof-associated accidents by controlling the first weighting step to about 82 m, contributing to safe and efficient mining; coal production was expected to increase about 126 kilotons.

22 November 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
YLYao Lu
Yao Lu
Ning JiangNing Jiang
Ning Jiang
CWChangxiang Wang
Changxiang Wang
MZMeng Zhang
Meng Zhang
DKDezhi Kong
Dezhi Kong
CWChangxiang Wang
Changxiang Wang
To address the problem of surface subsidence caused by the compression of filling gangue in deep mines, a layered compaction test was designed based on the zonation of the failure of the overburden in the goaf and layered property of the filling gangue. The deformation characteristics of filling gangue in natural and water-bearing states were obtained. The deformation of filling gangue during the 0~100 kN loading stage was an approximately positive S-type, which reflects the relative “advancement” in terms of deformation. The filling gangue deformation in the 100~500 kN loading stage was an approximately inverted S-type, which reflects the relative “lag” in terms of deformation. In a natural state, the load-time curves of the dead load stage were consistent. Under a water-bearing condition, the load-time curve for the dead load stage had apparent “step” characteristics and presented a special phenomenon of displacement rebound. Under gradient loading, the strain showed an exponential growth model, and energy dissipation showed a logarithmic growth model. Under a natural state, the energy dissipation showed consistently increasing distribution patterns, while the energy dissipation showed a normal distribution model under the water-bearing state.

6 March 2026 in Polymers
Verified
Journal Article
Open access
PDF file
BLBeining Liu
Beining Liu
MXMengtang Xu
Mengtang Xu
Under dual challenges of global infrastructure expansion and industrial solid waste management, alkali-activated polymers (AAP), as industrial solid-waste-based low-carbon cementitious materials, exhibit immense potential in grouting engineering applications. This review synthesizes current research progress through three critical dimensions: reaction mechanisms, performance characteristics, and grouting applications (grouting for reinforcement and water-blocking). The reaction mechanism universally comprises three stages: dissolution, depolymerization, and polycondensation. Key performance determinants include precursor composition (e.g., slag, fly ash, metakaolin) and alkaline activator properties (type, modulus, concentration). The multifunctional advantages of AAP are fundamentally governed by their microstructural evolution. Specifically, the rapid formation of highly cross-linked C-(A)-S-H and N-A-S-H gels directly contributes to rapid setting and high early strength development, with high-calcium precursors such as slag exhibiting faster strength gain than low-calcium systems, such as fly ash and metakaolin. Furthermore, the absence of vulnerable calcium hydroxide phases, combined with a densified, low-porosity aluminosilicate network, provides superior thermal stability, corrosion resistance, frost durability, and low permeability. Nevertheless, pronounced autogenous shrinkage and drying shrinkage, driven by mesopore moisture loss and the highly viscoelastic solid skeleton, remain primary constraints for field implementation. In grouting reinforcement, AAP can effectively enhance the strength and structural integrity of weak soils, such as soft clay, loess, and sulfate-rich saline soils. For grouting water-blocking, particularly in sodium-silicate-based binary systems, AAP achieves rapid gelation, superior washout resistance, and high anti-seepage pressure, proving optimal for groundwater inflow control. Future research must prioritize (i) standardized mix design protocols for performance consistency, (ii) advanced shrinkage mitigation strategies, (iii) systematic durability assessment under coupled environmental stressors (e.g., wet–dry cycling, chemical attack, thermal fatigue), and (iv) cross-disciplinary collaboration for industrial-scale validation.

19 January 2021 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
MXMengtang Xu
Mengtang Xu
KLKe Li
Ke Li
YXYoulin Xu
Youlin Xu
The mining of coal seam has a significant influence on the stability of the roadway near it, especially under the condition of high ground stress. To study the control mechanism of the surrounding rock under the influence of high ground stress, a general idea for the partition control of the rebuilding bearing arch (RBA) was proposed in this paper. Based on the basic mechanical performance test of the bearing arch, this paper built a mechanical model of the RBA based on Protodyakonov’s pressure arch theory, analyzed the influence of the strength of the bearing arch on the surrounding rock failure, and obtained the ultimate thickness of the bearing arch failure under high ground stress. The results show that the RBA’s damage is closely related to the overburden load and RBA’s thickness. The tensile stress and shear stress of RBA increase linearly with the overburden load increase and increase sharply with the load‐bearing arch’s thickness, showing a nonlinear relationship. To maintain the surrounding rock’s stability, it is necessary to ensure that the RBA’s thickness is within a specific range. The results are applied to the Wantian coal mine. The theoretically determined load‐bearing thickness is 10 m, which can effectively control the surrounding rock deformation and significantly reduce the roadway’s repair rate.