This paper presents an analysis to foresee renewable design requirement changes of net- zero carbon buildings (NZCBs) under different scenarios of potential future climate scenarios in the U.S. Northeast and Midwest regions. A climate change model is developed in this study using the Gaussian random distribution method with monthly temperature changes over the whole Northeast and Midwest regions, which are predicted based on a high greenhouse gas (GHG) emission scenario (i.e., the representative concentration pathways (RCP) 8.5). To reflect the adoption of NZCBs potential in future, this study also considers two representative future climate scenarios in the 2050s and 2080s of climate change years in the U.S. Northeast and Midwest regions. An office prototype building model integrates with an on-site photovoltaics (PV) power generation system to evaluate NZCB performance under the climate change scenarios with an assumption of a net-metering electricity purchase agreement. Appropriate capacities of the on-site PV system needed to reach NZCB balances are determined based on the building energy consumption impacted by the simulated climate scenarios. Results from this study demonstrated the emission by electricity consumption increases as moving toward the future scenarios of up to about 25 tons of CO₂-eq (i.e., about 14% of the total CO₂-eq produced by the electricity energy source) and the PV installation capacity to offset the emission account for the electricity consumption increases significantly up to about 40 kWp (i.e., up to more than 10% of total PV installation capacities) as the different climate scenarios are applied. It is concluded that the cooling energy consumption of office building models would significantly impact GHG emission as future climate scenarios are considered. Consequently, designers of NZCBs should consider high performance cooling energy systems in their designs to reduce the renewable energy generation system capacity to achieve net-zero carbon emission goals.

Energy loss through windows can be high relatively compared to other opaque surfaces because insulation performance of fenestration parts is lower in the building envelope. Electrically heated window systems are used to improve the indoor environment, prevent condensation, and increase building energy efficiency. The purpose of this study is to analyze the thermal behaviors of a heated window under a field experiment condition. Experiments were conducted during the winter season (i.e., January and February) with the energy-efficient house that residents occupy. To collect measured data from the experimental house, temperature and heat flux meter sensors were used for the analysis of heat flow patterns. Such measured data were used to calculate heat gain ratios and compare temperature and dew point distribution profiles of heated windows with input power values under the changed condition in the operating temperature of the heated glazing. Results from this study indicated that the input average heat gain ratio was analyzed to be 75.2% in the south-facing and 83.8% in the north-facing at nighttime. Additionally, compared to January, reducing the operating temperature of the heated glazing by 3 °C decreased the input energy in February by 44% and 41% for the south-facing and north-facing windows, respectively. Through such field measurement study, various interesting results that could not be found in controlled laboratory chamber conditions were captured, indicating that the necessity of establishing various control strategies should be considered for the development and commercialization of heated windows.