The coating is one of the biggest problems in the recycling of coated multicomponent hardmetal scraps. The isothermal oxidation behavior of WC-Co multicomponent cemented carbide inserts with a TiCN/Al2O3/TiN hard coating in the recycling process was investigated. The oxidation rate slowed down as the protective coating blocked element diffusion. A rapid oxidation rate was obtained when they were milled into powders and isothermally oxidized at 900 °C. A rapid path for element diffusion was provided by the defects, which were promoted by stress, expansion, and gas volatilization. Both the TiN and TiCN layers were oxidized to a porous TiO2 scale, while the Al2O3 phase remained and the dense Al2O3 layer acted as a barrier for its good oxidation resistance. Pieces of the Al2O3 layer were obviously seen in the final oxides. This provides critical information to reduce the negative effect of coatings and improve the performance of recycled WC powders and hard alloys.
25 May 2017 in DEStech Transactions on Social Science, Education and Human Science
Aiming to develop the LED industry in Nanchang, the present situation and the problem of development in LED industry were studied. And the status of talent training in LED industry of Nanchang was briefly introduced. The significance of talents training on LED related specialty in Nanchang was analyzed. Combining with the characteristics and advantages of the development of Nanchang, the solution was proposed. In corporation with related enterprise, the reform of colleges would be accelerated. This is beneficial for students and teachers. It is a solution for lack of LED professionals in turn.
The service life of the LED was much shorter than expected in theory. Its reliability needs to be improved. In this paper, the reliability of the blue GaN-based LED was studied by the current aging method. The light output of LED with different aging time was tested. The results showed that the light intensity decreased faster than that of light power. It may be ascribe to the attenuation of epoxy resin. So the optimal packaging materials were helpful to the improvement of the performance of the LED.