In nanoscale structure sizes, the surface-to-bulk energy ratio is high and the surface effects must be taken into account. Surface effect plays a key role in accurately predicting the vibration behavior of nanostructures. In this paper, the wave behaviors of a single-walled carbon nanotube (CNT) conveying fluid are studied. The nonlocal Timoshenko beam theory is used and the surface effect is taken into account. It is found that the fluid can flow at a very high flow velocity and the wave propagates in the terahertz frequency range. The surface effects can significantly enhance the propagating frequency. This finding is different from the classical model where the surface effect is neglected.
1 September 2013 in International Journal of Mechanical Sciences
In order to improve the strength and toughness of materials, nanoparticle is always embedded into epoxy resin and fiber composite materials. The influence of the number, distribution and mechanical property of nanoparticle arranged around the fiber on fiber reinforced composites is evaluated in this paper. A finite element analysis under a tensile load is performed by using commercial finite element software named as ABAQUS. Both the stress contour and progressive damage failure mode of the representative volume element (RVE) model of fiber reinforced composites are obtained. A series of computational experimental results indicate that both the space geometry property and mechanical property of nanoparticle have a significant effect on the stiffness and strength properties of these composite materials.
This paper presents an linear quadratic Gaussian (LQG)-based robust control strategy for active noise reduction in a 3D enclosure wherein acoustic-structure interaction dynamics is present. The acoustic disturbance is created by the piezo-actuated vibrating boundary surface of the enclosure. The control signal is generated by the speaker which is noncollocated with the sensing microphone mounted inside the enclosure. The dynamic model of the system is obtained using frequency-domain system identification techniques. The state weighting matrix in the LQG cost function is determined analytically in the closed-form which allows the control designer to directly penalize the total acoustic energy of the system. The robustness of the controller is also ensured to guarantee the closed-loop stability against the unmodeled dynamics and parametric uncertainties. Simulation and experiment results are given which demonstrate the effectiveness of the proposed control methodology.